Bedienungsanleitung Vonroc CT501AC (Seite 7 von 24) (Deutsch, Englisch, Holländisch, Französisch)

778553

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

WWW.VONROC.COM

Never operate the axle locking button if the

engine is still rotating.

Stand for the Combitool

• Assembly the stand (11) on to the workbench

clamp (12).

• Mount the assembled stand on the side of a

workbench or worktop with a maximum thick-

ness of 60 mm.

• The height of the stand is adjustable. Loosen the

top tube of the stand by turning it anticlockwise.

Draw the tube out to its maximum height and se-

cure it by turning the tube clockwise. The height of

the suspension bracket is adjustable by loosening

the black knob. After adjusting the suspension

bracket to the correct height, retighten the knob.

• Attach the Combitool to the suspension bracket

of the stand; this suspension bracket can be

turned 360°.

Accessories for the Combitool

Always check that the maximum rpm of the accessory

is suitable for the maximum speed of the Combitool.

Grinding stones (Fig. D)

When using a grinding stone the ﬁrst time, use the

dressing stone to balance it. The dressing stone

can also be used for cleaning the surface or to give

the grinding stone a special shape.

Material Speed setting

Stone, shell -

Steel +

Aluminium, brass + -

Plastic -

Felt wheels (Fig. E)

The felt wheels should be screwed on the mandrel.

Material Speed setting

Steel +

Aluminium, brass + -

Plastic +

Sanding bands and disc (Fig. F)

Material Speed setting

Wood + +

Steel -

Aluminium, brass + -

Plastic -

High speed cutter, Diamond wheel point and Drill

(Fig. G)

Material Speed setting

Stone, shell Max

Steel + -

Aluminium, brass + +

Plastic -

4. MAINTENANCE

Make sure that the machine is not live

when carrying out maintenance work on

the motor.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that the

ventilation openings are free of dust and dirt. Re-

move very persistent dirt using a soft cloth moiste-

ned with soapsuds. Do not use any solvents such

as gasoline, alcohol, ammonia, etc. Chemicals such

as these will damage the synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected at

the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/EC

for Waste Electrical and Electronic Equipment and its

implementation into national right, power tools that

are no longer usable must be collected separately

and disposed of in an environmentally friendly way.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of

defects in both materials and workmanship for the

period lawfully stipulated starting from the date of

original purchase. Should the product develop any

failure during this period due to defective material

and/or workmanship then contact VONROC directly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc CT501AC Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info