Bedienungsanleitung Vonroc DS501AC (Seite 6 von 40) (Deutsch, Englisch, Holländisch, Französisch, Polnisch, Türkisch)

764083

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

WWW.VONROC.COM

10. Sanding pad cover

11. Sanding pad

12. Sanding paper

13. Dust hose

14. Hex key holder

3. ASSEMBLY

Before assembly, always switch off the

machine and remove the mains plug from

the mains.

Mounting the side handle (Fig. A)

• The side handle (5) can be screwed into one of

the two side handle connection points (8).

Connecting the dust extraction system (Fig. A, C)

It is highly recommended to use the machine with

the dust hose and dust bag, ensuring optimal dust

extraction.

• Push the Dust hose (13) onto the Dust extracti-

on port (6) as shown on ﬁgure C.

• Make sure the dust bag is mounted to the dust

hose. The dust bag is ﬁtted with a carrying

strap, allowing the user to carry the dust bag

whilst using the tool.

Note: The dust bag should be emptied when the

bag is half full to maintain optimal dust extraction.

Mounting and removing sanding paper (Fig. B)

• Hold the machine on its side or upside down, as

shown on Fig. B

• Mount sanding paper (12) with the required

grain size onto the sanding pad (11). Make

sure that the perforation in the sanding paper

(12) corresponds with the perforation on the

sanding pad (11).

• To remove the sanding paper (12), simply pull

the sanding paper from the sanding pad (11).

Note: Use coarse sanding paper for sanding rough,

uneven surfaces. Use medium sanding paper for

removing the remaining scratches from the coarse

sanding paper. Use ﬁne sanding paper for ﬁnishing

surfaces.

Replacing the sanding pad (Fig. A)

Only install the sanding pad speciﬁed by the

manufacturer onto the machine.

Removing the sanding pad:

1. Remove sanding paper (12) from the sanding

pad (11).

2. Insert the supplied hex key into the bolt on the

sanding pad (11).

Whilst holding the sanding pad (11) ﬁrmly, turn

the wrench anti-clockwise to loosen the hex bolt.

4. The sanding pad (11) now can be removed.

Mounting the sanding pad:

1. Mount the sanding pad (11) onto the machine.

2. Insert the bolt into the sanding pad (11) and

insert the hex key into the bolt.

3. Whilst holding the sanding pad (11) ﬁrmly, turn

the wrench clockwise to fasten the hex bolt.

4. OPERATION

Switching on and off (Fig. A)

• To switch on the machine, press the lock-on

button (3) and afterwards the on/off switch (1).

•

To switch the machine to continuous mode, keep

the on/off switch (1) pressed and simultaneously

press the lock-on button (3).

• To switch off continuous mode, press the on/off

switch (1) again.

• To switch off the machine, release the on/off

switch (1).

Note: It is recommended to keep the motor running

for a short period of time after sanding, so that

residual dust can be collected into the bag.

Speed adjustment (Fig. A)

The required speed can be adjusted by using the

Speed adjustment wheel (4). Also during operation

the rotational speed can be adjusted.

• To increase the speed, turn the Speed adjust-

ment knob (4) clockwise.

• To decrease the speed, turn the Speed adjust-

ment knob (4) anti-clockwise.

The required speeds depends on the material

and can be determined by practical testing.

Suction power adjustment (Fig. A)

The machine is ﬁtted with a self-extracting dust

system, allowing dust to be extracted from the

working surface into the dust bag, helping to

maintain a clean and healthy working environment.

The suction power can be adjusted by turning the

Suction power adjustment wheel (7).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc DS501AC Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info