Bedienungsanleitung Vonroc DS502AC (Seite 7 von 44) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

764081

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

7WWW.VONROC.COM

Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

ADDITIONAL SAFETY INSTRUCTIONS

• Do not use oversized sanding sheets, but follow

the manufacturer’s speciﬁcations for the size of

sanding sheets. Sanding sheets which project

over the sanding pad may cause injuries as well

as block and rip the sanding sheets or cause a

kickback.

• It is not recommended to sand lead paint. Lead

paint should be removed by a specialist only.

• Do not work on materials which release hazar-

dous substances (e.g. asbestos). Take precauti-

ons if hazardous, combustible or explosive dust

is likely to occur. Wear protective dust mask.

Use dust extraction system.

• If plaster board or plaster is sanded, this may

cause static electricity to build up on the tool.

To ensure your safety, the wall sander is

earthed. Remove dust with an earthed dust

extractor only.

• Do not work materials containing asbestos.

Asbestos is considered carcinogenic.

• Do not use the machine for sanding magnesium

workpieces.

• Wear safety goggles. Wear hearing protection.

If necessary, use other protective means, such

as safety gloves, safety shoes, etc.

• Hold the machine by the insulated gripping

surfaces where the accessory may contact hid-

den wiring or the mains cable. If the accessory

contacts a ‚live‘ wire, the exposed metal parts

of the machine can also become ‚live‘. Risk of

electric shock.

• Be very careful when sanding painted surfaces.

• Before use, remove all nails and other metal

objects from the workpiece.

• Make sure that the workpiece is properly sup-

ported or ﬁxed.

• Only use sanding paper that is suitable for use

with the machine.

• Only use sanding paper with the correct

dimensions. Make sure that the sanding paper

is properly mounted.

• Inspect the sanding paper before each use.

Do not use sanding paper that is worn because

of prolonged use.

• Never put the machine down on a table or a

workbench before it has been switched off.

Electrical safety

Always check that the voltage of the power

supply corresponds to the voltage on the

rating plate label.

• Do not use the machine if the mains cable or

the mains plug is damaged.

• Only use extension cables that are suitable for

the power rating of the machine with a mini-

mum thickness of 1.5 mm2. If you use an exten-

sion cable reel, always fully unroll the cable.

2. MACHINE INFORMATION

Intended use

The machine is designed for sanding walls and

ceilings, for sanding smoothed drywalls, for remo-

ving paint, wallpaper and adhesive remnants. It is

not permitted to use cutting-off wheels, roughing

wheels, fan-like grinding wheels or wire brushes. The

machine is not suitable for processing objects con-

taining asbestos. Improper use may damage the tool.

TECHNICAL SPECIFICATIONS

Model No. DS502AC

Voltage 220-240V ~

Frequency 50/60 Hz

Power input 1050W

No-load speed 600-2600/min

Disc diameter Ø 215 mm

Weight 5.04 kg

Sound pressure level L

93+3 dB(A)

Acoustic power level L

104+3 dB(A)

Vibration

4.16+1.5 m/s

Wear hearing protection.

Vibration level

The vibration emission level stated in this instruc-

tion manual has been measured in accordance

with a standardized test given in EN60745; it may

be used to compare one tool with another and as

a preliminary assessment of exposure to vibration

when using the tool for the applications mentioned.

• Using the tool for different applications, or with

different or poorly maintained accessories, may

signiﬁcantly increase the exposure level.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc DS502AC Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info