764003
8
Zoom out
Zoom in
Vorherige Seite
1/56
Nächste Seite
8
EN
WWW.VONROC.COM
TECHNICAL SPECIFICATIONS
Model No. ET503DC
Recommended charger
adapter
5V D.C. USB
500mA to 1500mA
Type plug side A USB type A
Type plug side B USB type Micro B
Number of staples/nails 30/min.
Staples 6 up to 10 mm
Nails 6 up to 10 mm
Weight ca. 0.66 kg
Sound pressure level L
PA
82.2+3 dB(A)
Sound power level L
WA
93.2+3 dB(A)
Vibration
2.537+1.5 m/s
2
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN60745; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2 - 3.
1. Reload lever
2. Cartridge shaft
3. Switch
4. “0/1” switch
5. Top
6. Safety pin
7. Cartridge filling level window
8. Charger cable
9. Charging socket
10. Battery indication light
3. OPERATION
Charging the device (Fig. A)
Plug the charger cable (8) (included) into an
adapter (not included).
Plug the charger cable (8) into the machine.
(Fig. E)
Plug the charger plug into an electrical outlet
and wait for a while. The charger indication
light (10) will lighten up and show the charging
status.
LED Charger status
Red Battery charging in progress.
Green Battery charging finished, battery fully charged.
After the battery is fully charged remove the
charger plug from the outlet and remove the small
plug from the device.
Fully charging the battery may take up to 2-3 hours.
If the red LED charging indicator starts glowing
during operation, this indicates that the battery will
soon be empty.
Application (Fig. B)
For this tool, use one of the following length for
staples or nails:
Staples: 6 up to 10 mm
Nails: 6 up to 10 mm
Loading the nails or staples (Fig. C)
Choose the correct nail or staple for the job.
Hold the tacker with bottom upwards.
Open de cartridge shaft (2) by slightly pressing
the reload lever (1).
Pull the reload lever backwards to open the
cartridge shaft (2).
For nails:
Place the nails upside down against the left side
of the cartridge shaft (2). The left side also shows
a nail-symbol on the cartridge shaft, see fig.D.
For staples:
Place the staples upside down in the cartridge
shaft (2).
Push the reload lever to fully close the cartridge
shaft.
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Vonroc ET503DC wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info