Bedienungsanleitung Vonroc GT501DC (Seite 10 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

764167

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

WWW.VONROC.COM

Only use the following batteries of the VONROC

VPOWER 20V battery platform. Using any other bat-

teries could cause serious injury or damage the tool.

CD801AA 20V, 2Ah Lithium-Ion

CD803AA 20V, 4Ah Lithium-Ion

The following charger of the can be used to charge

these batteries.

CD802AA Quick charger

The batteries of the VONROC VPOWER 20V battery

platform are interchangeable with all the VONROC

VPOWER 20V battery platform tools.

Vibration level

The vibration emission level stated in this instructi-

on manual has been measured in accordance with

a standardized test given in EN 50636-2-91; it may

be used to compare one tool with another and as

a preliminary assessment of exposure to vibration

when using the tool for the applications mentioned.

- Using the tool for different applications, or with

different or poorly maintained accessories, may

signiﬁcantly increase the exposure level.

- The times when the tool is switched off or when

it is running but not actually doing the job, may

signiﬁcantly reduce the exposure level.

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work patterns.

DESCRIPTION

The numbers in the text refer to the diagrams on

pages 2-5.

1. Battery

2. Battery unlock button

3. Battery charge indication

4. Charger

5. Charger LED indicators

6. On/off switch

7. Safety switch

8. Front handle

9. Front handle knob

10. Protection guard

11. Screw

12. Guardrail

13. Side wheel

14 Side wheel holder

15. Spool cover

16. Spool reel

17. Spool spring

18. Spool housing

19. Tip spool reel

20. Adjustment knob trimmer head

21. Adjustment ring trimmer head

22. Lower adjustment ring

23. Upper shaft

24. Lower shaft

25. Battery LED indicators button

3. ASSEMBLY

Before any work on the power tool, remove

the battery.

Warning! Do not use the grass trimmer

without the protection guard.

The machine must be charged before ﬁrst

use.

Inserting the battery into the machine (Fig. C1)

Ensure that the exterior of the battery is

clean and dry before connecting to the

charger or machine.

Insert the battery (1) into the base of the machine

as shown in Fig. C1.

2. Push the battery further forward until it clicks

into place.

Removing the battery from the machine (Fig. C1)

1. Push the battery unlock button (2).

2. Pull the battery out of the machine like shown

in Fig. C1.

Checking the battery charging status (Fig. C2)

• To check the battery charge status, push the

button (25) on battery shortly.

• The battery has 3 lights indicating the charge

level, the more lights that burn, the more charge

the battery has left.

•

When the lights are not burning it means the bat-

tery is empty and must be charged immediately.

Charging the battery with the charger (Fig. C2)

1. Take the battery (1) from the machine.

2. Turn the battery (1) to upside down position and

slide it onto the charger (4) as shown in Fig. C2.

3. Push the battery until it is fully pushed into the

slot.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc GT501DC Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info