Bedienungsanleitung Vonroc IT501DC (Seite 6 von 28) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

764064

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

WWW.VONROC.COM

Fig. C

• The optical resolution (D:S) is 12:1, i. e.: the

diameter of the measurement ﬁeld is 1/12 of

the distance to the object:

A. D = 12 mm, S = 1 mm

B. D = 60 mm, S = 5 mm

C D = 240 mm, S = 20 mm

Note: The object to be measured for accurate

measurements must be at least double the size of

the measurement ﬁeld.

Measuring

WARNING! Risk of injury due to laser beam!

Never direct the measuring beam towards

people, other living creatures or reﬂecting

surfaces.

Fig. A and B

• Press the measuring switch (3) or press the

[C/F] button (2) to switch the device on

• Press the [C/F] button (2) to switch the display

between “°C” and “°F”.

• Press the switch (3) for longer than 0.5

seconds to measure the correct value.

• As long as the switch (3) is being pressed

the temperature is measured constantly and

“HOLD” disappears from the display.

• As long as the switch (3) is being pressed the

highest measured temperature is shown on

display as “MAX” (9).

• The last measured temperature and the Max

measured temperature is saved when the

switch (3) is released and shown on the display

on position (8).

To recover the last reading when machine is off,

press the [C/F] button.

Switching off

• If no activity occurs the device switches itself

off after 22 seconds.

• The low battery icon (10) shows when the

power is low.

5. MAINTENANCE

Cleaning

NOTICE! Risk of product damage! Never

submerge device in water while cleaning.

Do not use cleaning agents or solvents.

Wipe the device using a dry cloth.

Storage

NOTICE! Risk of product damage! Always

handle measuring instruments with care.

• Store the product in a dry, well-ventilated place.

•

Only store and transport the product in its original

packaging.

• Prevent large temperature ﬂuctuations: Always

temper the product for a while before use in

extremely cold or hot environments.

Taking out of operation for a longer period of time

• When not in use for a longer period of time,

remove the batteries.

NOTICE! Risk of product damage!

Old, leaky batteries can damage the pro-

duct. Check the battery regularly.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected at

the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/EC

for Waste Electrical and Electronic Equipment and its

implementation into national right, power tools that

are no longer usable must be collected separately

and disposed of in an environmentally friendly way.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of defects

in both materials and workmanship for the period

lawfully stipulated starting from the date of original

purchase. Should the product develop any failure

during this period due to defective material and/or

workmanship then contact VONROC directly.

The following circumstances are excluded from this

guarantee:

• Repairs and or alterations have been made

or attempted to the machine by unauthorized

service centers;

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc IT501DC Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info