Bedienungsanleitung Vonroc IW501DC (Seite 9 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

819199

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

WWW.VONROC.COM

• Fully charging the 4Ah battery may take up to

120 minutes.

After the battery is fully charged remove the char-

ger plug from the outlet and remove the battery

from the charger.

When the machine is not being used over a

longer period of time it is best to store the

battery in charged condition.

Removing and mounting accessories

Use only 3/8" (9.5mm) impact accessories.

Non-impact accessories may break and

cause a hazardous condition. Inspect

accessory prior to use to ensure that it

contains no cracks.

• Turn off the machine.

• Move the direction reversing switch (7) to the

middle position to lock the movement of the on/

off switch.

• Remove socket from chuck (6), if there is one.

• Click the new socket on the chuck (6).

• Check if the socket is properly attached.

• To remove the socket, simply pull it off.

4. OPERATION

Switching the machine on and off (Fig. A)

The on/off switch (5) is used for activating the

machine and adjusting rotation speed.

• Pressing the on/off switch (5) will activate the

machine, the further the switch is being pus-

hed, the faster the drill will turn.

• Releasing the on/off switch (5) will stop the

machine.

• Move the direction reversing switch (7) to the

middle position to lock the movement of the on/

off switch.

Only lay down the machine when it has

stopped running completely. Do not place it

on a dusty surface as particles of dust

could get into the mechanism.

Adjusting the direction of rotation (Fig. A)

• Set the direction switch (7) to position in

order to drive screws or nuts.

• Set the direction switch (7) to position in

order to remove screws or nuts.

Work light (Fig. A)

The machine is equipped with a work light (4) to

illuminate the work location.

• It automatically switches on when the on/off

switch is being pressed.

• It automatically switches off when the on/off

switch is released again.

5. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

battery pack from the machine.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that the

ventilation openings are free of dust and dirt. Re-

move very persistent dirt using a soft cloth moiste-

ned with soapsuds. Do not use any solvents such

as gasoline, alcohol, ammonia, etc. Chemicals such

as these will damage the synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected at

the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/EC

for Waste Electrical and Electronic Equipment and its

implementation into national right, power tools that

are no longer usable must be collected separately

and disposed of in an environmentally friendly way.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of

defects in both materials and workmanship for the

period lawfully stipulated starting from the date of

original purchase. Should the product develop any

failure during this period due to defective material

and/or workmanship then contact VONROC directly.

The following circumstances are excluded from this

guarantee:

• Repairs and or alterations have been made

or attempted to the machine by unauthorized

service centers;

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc IW501DC Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info