Bedienungsanleitung Vonroc IW502DC (Seite 6 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

819200

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

WWW.VONROC.COM

resulting in ﬁre, explosion or risk of injury.

Do not expose a battery pack or tool to ﬁre

or excessive temperature. Exposure to ﬁre or

temperature above 130 °C may cause explosion.

NOTE The temperature „130 °C“ can be replaced

by the temperature „265 °F“.

Follow all charging instructions and do not

charge the battery pack or tool outside the

temperature range speciﬁed in the instructions.

Charging improperly or at temperatures outside

the speciﬁed range may damage the battery and

increase the risk of ﬁre.

6) Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replacement

parts. This will ensure that the safety of the

power tool is maintained.

Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

If the supply cord of the charger is damaged, it

must be replaced by the manufacturer, its ser-

vice agent or similarly qualiﬁed persons in order

to avoid a hazard.

ADDITIONAL SAFETY WARNINGS FOR IM

PACT WRENCHES

1. Hold the power tool by insulated gripping surfa-

ces, when performing an operation where the

fastener may contact hidden wiring. Fasteners

contacting a "live" wire may make exposed

metal parts of the power tool "live" and could

give the operator an electric shock.

2. Wear ear protectors when impact drilling.

Exposure to noise can cause hearing loss.

3. Check the impact socket carefully for wear,

cracks or damage before installation.

4. Hold the tool ﬁrmly.

5. Brace the tool properly before use. This tool

produces a high output torque and without

properly bracing the tool during operation, loss

of control may occur resulting in personal injury.

6. Keep hands away from rotating parts.

7. Do not touch the impact socket, bolt, nut or the

workpiece immediately after operation. They

may be extremely hot and could burn your skin.

8. Always wait until the power tool has come to

a complete stop before placing it down. The

application toolcan jam and cause you to lose

control of the power tool.

9. Always be sure you have a ﬁrm footing. Be sure

no one is below when using the tool in high

locations.

10. The proper fastening torque may differ depen-

ding upon the kind or size of the bolt. Check the

torque with a torque wrench.

11 Make sure there are no electrical cables, water

pipes, gas pipes etc. that could cause a hazard

if damaged by use of the tool. Use suitable de-

tectors to determine if there are hid-den supply

lines or contact the local utility companyfor

assistance.

SAFETY WARNINGS FOR BATTERY

a) Do not open the battery. Danger of short-

circuiting.

b) Protect the battery against heat, e. g., against

continuous intense sunlight, ﬁre, water, and

moisture. Danger of explosion.

c) In case of damage and improper use of the bat-

tery, vapours may be emitted. Ventilate the area

and seek medical help in case of complaints.

The vapours can irritate the respiratory system.

d) Use the battery only in conjunction with your

Vonroc product. This measure alone protects

the battery against dangerous overload.

e) The battery can be damaged by pointed objects

such as nails or screwdrivers or by force

applied externally. An internal short circuit can

occur and the battery can burn, smoke, explode

or overheat.

SAFETY WARNINGS FOR CHARGER

Intended use

Charge only CD801AA and CD803AA type rechargea-

ble Battery packs with the charger. Other types of bat-

teries may burst causing personal injury and damage.

a) The appliance is not to be used by persons

(including children) with reduced physical,

sensory or mental capabilities, or lack of expe-

rience and knowledge, unless they have been

given supervision or instruction.

b) Children being supervised not to play with the

appliance.

c) Do not recharging non-rechargeable batteries!

d) During charging, batteries must be placed in

the well ventilated area!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc IW502DC Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info