Bedienungsanleitung Vonroc JR501DC (Seite 8 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch)

804985

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

WWW.VONROC.COM

18. Antenna tip

19. USB port cover

20. Battery LED indicators button

21. Battery LED indicators

22. Charger

23. Charger LED indicators

3. ASSEMBLY

The battery must be charged before ﬁ rst use.

Inserting the battery into the machine (Fig. B)

Ensure that the exterior of the battery is

clean and dry before connecting to the

charger or machine.

1. Insert the battery (4) into the base of the

machine as shown in Fig. B.

2. Push the battery further down until it clicks into

place.

Removing the battery from the machine (Fig. B)

1. Push the battery unlock button (5).

2. Pull the battery out of the machine like shown

in Fig. B.

Checking the battery charging status (Fig. F)

• To check the battery charge status, push the

button (20) on battery shortly.

• The battery has 3 lights indicating the charge

level, the more lights that burn, the more charge

the battery has left.

• When the lights are not burning it means

the battery is empty and must be charged

immediately.

Charging the battery with the charger (Fig. F)

1. Take the battery (4) from the machine.

2. Turn the battery (4) to upside down position and

slide it onto the charger (22) as shown in Fig. F.

3. Push the battery until it is fully pushed into the

slot.

4. Plug the charger plug into an electrical outlet

and wait for a while. The LED indicators on

the charger (23) will lighten up and show the

charger status.

Red LED Status Green LED status Charger status

Off Off No power

Off On

Standby mode:

- No battery is

inserted or,

- Battery inserted

but charging has

ﬁ nished

On Off Battery charging in

progress

• Fully charging the 2Ah battery may take up to

60 minutes.

• Fully charging the 4Ah battery may take up to

120 minutes.

After the battery is fully charged remove the

charger plug from the outlet and remove the

battery from the charger.

When the machine is not being used over a

longer period of time it is best to store the

battery in charged condition.

Setting the antenna (Fig. C)

• Point the antenna upwards.

• Take the tip (18) and pull it out to a total length

of 30cm, there are 5 sections.

• Point the antenna (17) toward the direction that

enables the best reception.

Tip! When the reception is insufﬁ cient,

position the radio at a different location that

enables better reception.

4. OPERATION

Place the product on an even surface to

prevent falling.

Turn on/ turn off (Fig. D)

• Hold the power button (7) for a few seconds to

turn on the radio. Until you hear “power on”.

• Hold the power button (7) for a few seconds to

turn off the radio. Until you hear “power off”.

Adjusting volume (Fig. D)

• Increase volume: press “+” button (13).

• Decrease volume: press “-” button (14).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc JR501DC Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info