Bedienungsanleitung Vonroc JS504DC (Seite 7 von 116) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch)

819202

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

WWW.VONROC.COM

6) Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replacement

parts. This will ensure that the safety of the

power tool is maintained.

Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SAFETY WARNINGS FOR JIG SAWS

•

Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring. Cutting

accessory contacting a “live” wire may make

exposed metal parts of the power tool “live” and

could give the operator an electric shock.

• Keep hands away from the sawing range. Do

not reach under the workpiece. Contact with

the saw blade can lead to injuries.

•

Apply the machine to the workpiece only when

switched on. Otherwise there is danger of kick-

back when the cutting tool jams in the workpiece.

• Pay attention that the base plate rests securely

on the material while sawing. A jammed saw

blade can break or lead to kickback.

• When the cut is completed, switch off the

machine and then pull the saw blade out of the

cut only after it has come to a standstill. In this

manner you can avoid kickback and can place

down the machine securely.

•

Use only undamaged saw blades that are in per-

fect condition. Bent or dull saw blades can break,

negatively inﬂuence the cut, or lead to kickback.

•

Do not brake the saw blade to a stop by applying

side pressure after switching off. The saw blade

can be damaged, break or cause kickback.

• Use appropriate detectors to determine if utility

lines are hidden in the work area or call the lo-

cal utility company for assistance. Contact with

electric lines can lead to ﬁre and electric shock.

Damaging a gas line can lead to explosion. Pe-

netrating a water line causes property damage.

• Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held more

secure than by hand.

• Always wait until the machine has come to a

complete stop before placing it down. The tool

insert can jam and lead to loss of control over

the power tool.

•

Use clamps or another practical way to secure

and support the workpiece to a stable platform.

Holding the workpiece by hand or against your

body leaves it unstable and may lead to loss of

control.

SAFETY WARNINGS FOR BATTERY

Do not open the battery. Danger of shortcircuiting.

b) Protect the battery against heat, e. g., against

continuous intense sunlight, ﬁre, water, and

moisture. Danger of explosion.

c) In case of damage and improper use of the bat-

tery, vapours may be emitted. Ventilate the area

and seek medical help in case of complaints.

The vapours can irritate the respiratory system.

d) Use the battery only in conjunction with your

Vonroc product. This measure alone protects

the battery against dangerous overload.

The battery can be damaged by pointed objects

such as nails or screwdrivers or by force applied

externally. An internal short circuit can occur and

the battery can burn, smoke, explode or overheat.

SAFETY WARNINGS FOR CHARGER

Intended use

Charge only CD801AA and CD803AA type rechargea-

ble Battery packs with the charger. Other types of bat-

teries may burst causing personal injury and damage.

a) The appliance is not to be used by persons

(including children) with reduced physical, sen-

sory or mental capabilities, or lack of experien-

ce and knowledge, unless they have been given

supervision or instruction.

b) Children being supervised not to play with the

appliance.

c) Do not recharging non-rechargeable batteries!

d) During charging, batteries must be placed in

the well ventilated area!

2. MACHINE INFORMATION

Intended use

The machine is intended for sawing wood, metal,

plastics, ceramics, rubber, etc. to any required size

and in any required shape, while keeping the ba-

seplate resting ﬁrmly on the workpiece. A suitable

saw blade must always be used.

TECHNICAL SPECIFICATIONS

This manual has been drawn up for

different sets / article numbers. Check the

corresponding article number in below

speciﬁcations table for the correct

composition and contents of your set.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc JS504DC Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info