Bedienungsanleitung Vonroc LB501AC (Seite 7 von 44) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

763900

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

7WWW.VONROC.COM

• Use only genuine replacement parts and acces-

sories.

Immediately switch off the machine when:

• Excessive sparking of the carbon brushes and

clutter in the collector.

• Interruption of the mains plug, mains lead or

mains lead damage.

• Defect switch.

• Smoke or stench of scorched isolation.

Electrical safety

Always check that the voltage of the power

supply corresponds to the voltage on the

rating plate label.

• Do not use the machine if the mains cable or

the mains plug is damaged.

• Only use extension cables that are suitable

for the power rating of the machine with a

minimum thickness of 1.5 mm2. If you use an

extension cable reel, always fully unroll the

cable.

2. MACHINE INFORMATION

Intended use

The leaf blowers are developed to remove leaves

from the street, garden and lawn. A fan inside the

leaf blower causes a ﬂow of air, which can be used

to blow leaves away or to vacuum the leaves into

the collection bag.

TECHNICAL SPECIFICATIONS

Model No. LB501AC

Voltage 230-240V 50Hz

Input power 3000 W

No load speed 14000 rpm

Max. blower velocity 270 km/h

Max air volume 13.2 m/min

Shredding ratio 10:1

Blower bag capacity 35 L

Weight 3.0 kg

Sound pressure level (Lpa) 84.1dB(A), K=3dB(A)

Acoustic power level (Lwa) 95.8dB(A), K=2.21 dB(A)

Vibration 7.490m/s

, k=1.5m/s

Vibration level

The vibration emission level stated in this instruc-

tion manual has been measured in accordance

with a standardized test given in EN60745; it may

be used to compare one tool with another and as

a preliminary assessment of exposure to vibration

when using the tool for the applications mentioned.

• Using the tool for different applications, or with

different or poorly maintained accessories, may

signiﬁcantly increase the exposure level.

• The times when the tool is switched off or when

it is running but not actually doing the job, may

signiﬁcantly reduce the exposure level.

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work patterns.

DESCRIPTION

The numbers in the text refer to the diagrams on

pages 2-3.

1. Main handle

2. Auxiliary handle

3. Power cord

4. Cable hook

5. On/off switch

6. Upper tube

7. Lower tube

8. Vacuum bag

9. Vacuum bag inlet tube

10. Leaf bag securing clip

11. Blow/vacuum option lever

12. Carrying belt hook

13. Wheel holder

14. Wheels

15. Carrying belt

3. ASSEMBLY

Before assembly, always switch off the

machine and remove the mains plug from

the mains.

Assembling the tubes (Fig. A, B)

• Screw the upper tube (6) onto the motor hou-

sing.

• Screw the lower tube section (7) onto the upper

tube (6).

• Mount the included wheel holder (13) by sliding

it onto the lower tube section (7) until the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc LB501AC Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info