Bedienungsanleitung Vonroc LD503DC (Seite 7 von 44) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

764069

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

WWW.VONROC.COM

Clear button (Fig. A)

Press clear button (8) to clear the last command or

displayed data.

Unit conversion (Fig. A)

The instrument’s default unit is meters but can be

set to meters ‘m’, feet ‘ft’ and inches ‘in’. Press the

units button (7) to switch between units of measu-

rements.

Adjusting measuring reference (Fig. A+C)

When the device is switched on, quickly press the

measuring reference button (4) to adjust the measu-

re reference. It’s possible to measure from the front

or the rear of the device.

Distance is measured from the rear of the

device (standard setting).

Distance is measured from the front of the

device.

Memory (Fig. A)

When the device is switched on, quickly press the

addition (5) or subtraction (6) button. Last 20 values

are displayed. Quickly press the addition (5) or

subtraction (6) button to navigate through last 20

values.

Measuring

WARNING! Risk of injury due to laser beam!

Never direct the measuring beam towards

people, other living creatures or reﬂecting

surfaces.

Target surfaces: Measuring errors can occur

when measuring to colorless liquids, glass,

styrofoam or semi-permeable surfaces or

when aiming at high gloss surfaces. Against

dark surfaces the measuring time increases.

Single-mode measurement (Fig. A+D)

When the device is switched on, quickly press the

measure button (2) to activate the laser (10). Aiming

the laser onto the target and quickly press the

measure button (2) again will trigger single-mode

measurement; the result is displayed immediately.

Continuous-mode measurement (Fig. A+E)

When the device is switched on, holding down the

measure button (2) will trigger continuous-mode

measurement. The current measurement is shown

in the main line and the Minimum(E2) and maximum

(E3) measured values above.

Area measurement (Fig. A+F)

Press the function button (3) to change measu-

rement function to area measurement. Select the

function and begin the measurement.

1. Pressing the measure button (2) will activate the

laser.

2. Aiming the laser onto the target and quickly pres-

sing the measure button (2) again for measuring

the length. The result is displayed immediately.

3. Pressing the measure button (2) will activate the

laser.

4. Aiming the laser onto the target and quickly pres-

sing the measure button (2) again for measuring

the width. The calculated result is shown in the

main line and the measured value above.

Volume measurement (Fig. A+G)

Press the function button (3) to change measure-

ment function to volume measurement. Select the

function and begin the measurement.

1. Pressing the measure button (2) will activate the

laser.

2. Aiming the laser onto the target and quickly pres-

sing the measure button (2) again for measuring

the length. The result is displayed immediately.

3. Pressing the measure button (2) will activate the

laser.

4. Aiming the laser onto the target and quick-

ly pressing the measure button (2) again for

measuring the width. The result is displayed

immediately.

5. Pressing the measure button (2) will activate the

laser.

6. Aiming the laser onto the target and quickly pres-

sing the measure button (2) again for measuring

the height. The calculated result is shown in the

main line and the measured value above.

Double area measurement (Fig. A+H)

Press the function button (3) to change measure-

ment function to double area measurement. Select

the function and begin the measurement.

1. Pressing the measure button (2) will activate the

laser.

2. Aiming the laser onto the target and quickly pres-

sing the measure button (2) again for measuring

the height. The result is displayed immediately.

3. Pressing the measure button (2) will activate the

laser.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc LD503DC Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info