Bedienungsanleitung Vonroc MM501DC (Seite 4 von 36) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

764070

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

WWW.VONROC.COM

1. SAFETY INSTRUCTIONS

Read the enclosed safety warnings, the additional

safety warnings and the instructions. Save the

safety warnings and the instructions for future

reference.

The following symbols are used in the user manual

or on the product:

Read the user manual.

Denotes risk of personal injury, loss of life

or damage to the tool in case of non-obser-

vance of the instructions in this manual.

The product is in accordance with the

applicable safety standards in the European

directives.

GENERAL POWER TOOL SAFETY WARNINGS

• To operate this device safely, the user must

have read and understood these instructions for

use before using the device for the ﬁrst time.

• Observe all safety instructions! Failure to do so

may cause harm to you and others.

• Retain all instructions for use, and safety in-

structions for future reference.

• If you sell or pass the device on, you must also

hand over these operating instructions.

• The device must only be used when it functions

properly. If the product or part of the product is

defective, it must be taken out of operation and

disposed of correctly.

• Beware of the sharp pins, they can cause per-

sonal injury or injury to others.

• Check calibration before use.

• Operate the device properly,conductive material

such as salts, carbon and metal can give false

positive readings.

Using battery-operated devices

•

Only use batteries approved by the manufacturer.

• Danger of ﬁre! Never charge the batteries.

• Keep batteries away from metal objects that

could cause short circuiting when not in use.

There is a risk of injuries and ﬁres.

• Fluid can escape from the battery when used

incorrectly. Battery ﬂuid may result in skin irri-

tations and burns. Avoid contact! In the event of

accidental contact, rinse thoroughly with water.

Immediately seek the aid of a physician in the

event of eye contact.

2. MACHINE INFORMATION

Intended use

The moisture meter is designed for use in wood-

working, water damage restoration, building con-

struction and home renovation. Examples include:

• Checking for moisture and mold on or below the

surface of carpets and subﬂooring;

• Measuring the moisture content of wood, dry-

wall or cement board before painting, wallpape-

ring, sealing or treating;

• Locating water leaks above ceilings, below

ﬂoors or behind walls;

• Selecting dry lumber, for example ﬁrewood.

Improper use may damage the tool.

TECHNICAL SPECIFICATIONS

Model no. MM501DC

Measurement Ranges

5 to 50% for wood

1.5 to 33% for building

materials

Measurement Accuracy ±2% for wood and building

material

Measurement Resolution 0.1%

Calibration Check Range

17.3% to 19.3%

Excessive-moisture alarm

levels

>16% for wood

>20% for building materials

LCD Size

51mm diagonal, with three

13mm high digits

Bar Graph Composition

3 each green, orange and

red LEDs

Auto Power Off Trigger 1 minute of inactivity

Low Battery Icon Trigger <7V

Operating Temperature 0° to 40°C

Operating humidity <70%RH non-condensing

Storage Temperature -10° to 50°C

Storage humidity 5%~95% RH

(without battery)

Dimensions 174 x 70 x 74mm

Weight 150g without battery

Power Source

(1) ‘9V’ battery (included)

9V 6F22 or 6LR6

recommended

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc MM501DC Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info