Bedienungsanleitung Vonroc MS502AC (Seite 7 von 92) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

764096

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

7WWW.VONROC.COM

1. SAFETY INSTRUCTIONS

Read the enclosed safety warnings, the additional

safety warnings and the instructions. Failure to follow

the safety warnings and the instructions may result in

electric shock, ﬁ re and/or serious injury. Save the safe-

ty warnings and the instructions for future reference.

The following symbols are used in the user

manual or on the product:

Read the user manual.

Denotes risk of personal injury, loss of life

or damage to the tool in case of non-obser-

vance of the instructions in this manual.

Risk of electric shock.

Keep bystanders away.

Wear a dust protection.

Wear ear and eye protection.

Attention: Laser radiation. Do not stare into

the beam Class 2 laser.

Keep hands away from the cutting area

while the power tool is running. Contact

with the saw blade can lead to injuries.

Danger area! Keep hands, ﬁ ngers or arms

away from this area.

Transport the machine only when the

machine is in inward transport position.

Class II machine - Double insulation -

You don’t need any earthed plug.

The product is in accordance with the

applicable safety standards in the European

directives.

123

The adjustable fence must be

pulled outward when sawing

mitre/bevel angles.

Ø30mm

Ømax.

254mm

Take note of the dimensions of

the saw blade. The hole

diameter must ﬁ t the tool

spindle without play. If it is

necessary to use reducers,

ensure that the dimensions of

the reducer are suitable for the

base blade thickness and the

saw blade hole diameter, as well

as the tool spindle diameter.

Wherever possible, use the

reducers provided with the saw

blade. The saw blade diameter

must match the information

speciﬁ ed on the symbol.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings and all

instructions. Failure to follow the warnings

and instructions may result in electric

shock, ﬁ re and/or serious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers to

your mains-operated (corded) power tool or batte-

ry-operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

b) Do not operate power tools in explosive at-

mospheres, such as in the presence of ﬂ amma-

ble liquids, gases or dust. Power tools create

sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while ope-

rating a power tool. Distractions can cause you

to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiﬁ ed plugs and matching outlets

will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase

the risk of electric shock.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc MS502AC Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info