Bedienungsanleitung Vonroc OT502AC (Seite 5 von 24) (Deutsch, Englisch, Holländisch, Französisch)

764072

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

WWW.VONROC.COM

• Inspect the machine and the accessories before

each use. Do not use accessories which are

bent, cracked, or otherwise damaged. If the

machine or one of the accessories is dropped,

inspect the machine or the accessory for damage.

If necessary, replace the accessory.

• Only use accessories that are recommended by

the manufacturer.

• Only use accessories that are suitable for the

application.

•

Only use accessories with the correct dimensions.

• Do not use accessories that require liquid cool-

ants. Risk of electric shock.

• Make sure that the accessories are properly

mounted. Do not use adapters or other aids to

mount accessories with another spindle diameter.

• Make sure that the maximum speed for the

accessory is larger than or the same as the

maximum speed of the machine. Refer to the

rating plate on the machine.

• Let the machine run at no load in a safe area

after mounting the accessories. If the machi-

ne vibrates strongly, immediately switch off

the machine, remove the mains plug from the

mains, and try to solve the problem.

• Make sure that the workpiece is properly sup-

ported or ﬁxed.

• Wear safety goggles. Wear hearing protecti-

on. Wear a dust mask. If necessary, use other

protective means, such as safety gloves, safety

shoes, etc. Risk of personal injury.

• Keep bystanders away from the work area. Make

sure that all persons in the work area wear

protective equipment. Risk of personal injury.

• Keep the mains cable away from the rotating

accessory. If the mains cable touches the rota-

ting accessory, your hands or arms may come

in contact with the accessory. Risk of personal

injury.

• Hold the machine by the insulated gripping

surfaces where the accessory may contact hid-

den wiring or the mains cable. If the accessory

contacts a ‘live’ wire, the exposed metal parts

of the machine can also become ‘live’. Risk of

electric shock.

• Do not use the machine while carrying it at your

side. Risk of personal injury.

•

Do not use the machine near ﬂammable materi-

als. Risk of ﬁre.

• Beware that the accessory continues to rotate

for a short period after switching off the machine.

Do not attempt to bring the accessory to a

standstill yourself.

• Never put the machine down on a table or a

workbench before it has been switched off.

• Regularly clean the ventilation slots. Risk of

electric shock.

Electrical safety

Always check that the voltage of the power

supply corresponds to the voltage on the

rating plate.

• Do not use the machine if the mains cable or

the mains plug is damaged.

• Only use extension cables that are suitable for

the power rating of the machine with a minimum

thickness of 1.5 mm2. If you use a extension

cable reel, always fully unroll the cable.

2. MACHINE INFORMATION

Intended use

Your multitool has been designed for light

sanding, sawing and scraping applications.

TECHNICAL SPECIFICATIONS

Model No. OT502AC

Mains voltage 220-240 V

Mains frequency 50 Hz

Power input 300 W

No-load speed 0-23.000 /min

Weight 1.21 kg

Sound pressure (Lpa) 86 dB(A)

Acoustic power (Lwa) 97 dB(A)

Uncertainty (K) 3 dB(A)

Vibration (sawing in steel) 7.38 m/s

Uncertainty (K) 1.5 m/s

Wear hearing protection.

Vibration level

The vibration emission level stated in this instruc-

tion manual has been measured in accordance

with a standardised test given in EN 60745; it may

be used to compare one tool with another and as

a preliminary assessment of exposure to vibration

when using the tool for the applications mentioned

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc OT502AC Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info