Bedienungsanleitung Vonroc PM504AC (Seite 7 von 48) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch, Schwedisch)

778350

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

WWW.VONROC.COM

5. Polishing pad

6. Wrench

7. Spindle

3. ASSEMBLY

Before assembly, always switch off the

machine and remove the mains plug from

the mains.

Mounting and removing accessories (Fig. A, B)

Make sure to use the right accessory for the

corresponding material. Use undamaged and clean

polishing accessories only.

Backing plate

1. Place the machine on its back.

Position the wrench (6) to engage the ﬂats on

the spindle (7). It may be necessary to rotate the

backing plate (4) to expose the spindle (7) ﬂats.

3. While holding the spindle (7) with the wrench

(5), rotate the backing plate(4) clockwise (by

hand) to tighten it.

Polishing pad

1. Place the machine on its back.

2. Firmly press the polishing pad (5) onto the hook

and loop backingplate (4).

To remove the pad (5), simply pull the pad from the

backingplate (4).

4. OPERATION

Switching on and off (ﬁg. A)

• To switch on the machine, slide the on/off

switch (1) to the front.

• To switch off the machine, slide the on/off

switch (1) to the rear.

Setting the speed (ﬁg. A)

The speed adjustment wheel (2) is used for setting

the speed. The speed adjustment wheel (2) can be

set to 6 positions. The ideal speed depends on the

application and on the material to be worked.

Do not set the speed during use.

• Turn the speed adjustment wheel (2) to the

required position.

5. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

mains plug from the mains.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that the

ventilation openings are free of dust and dirt. Re-

move very persistent dirt using a soft cloth moiste-

ned with soapsuds. Do not use any solvents such

as gasoline, alcohol, ammonia, etc. Chemicals such

as these will damage the synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected at

the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/EC

for Waste Electrical and Electronic Equipment and its

implementation into national right, power tools that

are no longer usable must be collected separately

and disposed of in an environmentally friendly way.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of defects

in both materials and workmanship for the period

lawfully stipulated starting from the date of original

purchase. Should the product develop any failure

during this period due to defective material and/or

workmanship then contact VONROC directly.

The following circumstances are excluded from this

guarantee:

• Repairs and or alterations have been made

or attempted to the machine by unauthorized

service centers;

• Normal wear and tear;

• The tool has been abused, misused or

improperly maintained;

• Non-original spare parts have been used.

This constitutes the sole warranty made by compa-

ny either expressed or implied. There are no other

warranties expressed or implied which extend

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc PM504AC Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info