Bedienungsanleitung Vonroc PM506DC (Seite 9 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch, Schwedisch)

778565

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

WWW.VONROC.COM

Removing the whisk

1. Loosen the assembled whisk using the supplied

spanners (10). To do so, hold the tool holder (4)

using one of the supplied spanners (10), and

use the second spanner to loosen the assemb-

led whisk.

2. Unscrew the whisk from the tool holder (4) in

anti-clockwise direction.

4. OPERATION

Switching on and off (Fig. B)

The on/off switch (7) is used for activating the

machine and adjusting speed.

• To start the machine, press and hold the lock off

button (8) and press the on/off switch (7).

•

To stop the machine, release the on/off switch (7).

Speed adjustment (Fig. B)

The required speed can be adjusted by using the

Speed adjustment wheel (9). Also during operation

the rotational speed can be adjusted.

•

To increase the speed, turn the Speed adjustment

knob (9) clockwise.

•

To decrease the speed, turn the Speed adjustment

knob (9) anti-clockwise.

The required speeds depends on the material and

can be determined by practical testing.

Optimum use

• For materials with low viscosity, e.g. emulsion

paint, varnishes, adhesive, grouting compound

and cement slurry, a stirrer whisk with a so-cal-

led left-hand spiral is recommended for opti-

mum use. With a left-hand spiral, the material is

moved from the top downwards and the stirrer

whisk is pushed upwards. Materials with low

viscosity are mixed in a way which minimises

splattering, so a low speed is recommended.

• For materials with high viscosity, e.g. plaster,

concrete, cement, screed, ﬁller and epoxy resin,

a stirrer whisk with a so-called right-hand spiral

is recommended for optimum use. With a right-

-hand spiral, the material is moved from the

bottom upwards and the stirrer whisk is pulled

downwards (working its way into the mixture).

Materials with high viscosity are mixed thoroug-

hly, so a high speed is recommended.

• For optimum results, move the power tool in an

up and down motion while mixing.

• It is recommended to clean the whisk after use,

for example by stirring the whisk in a bucket

ﬁlled with water.

5. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

battery pack from the machine.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that the

ventilation openings (3) are free of dust and dirt.

Remove very persistent dirt using a soft cloth moi-

stened with soapsuds. Do not use any solvents such

as gasoline, alcohol, ammonia, etc. Chemicals such

as these will damage the synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected at

the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/EC

for Waste Electrical and Electronic Equipment and its

implementation into national right, power tools that

are no longer usable must be collected separately

and disposed of in an environmentally friendly way.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of

defects in both materials and workmanship for the

period lawfully stipulated starting from the date of

original purchase. Should the product develop any

failure during this period due to defective material

and/or workmanship then contact VONROC directly.

The following circumstances are excluded from this

guarantee:

• Repairs and or alterations have been made

or attempted to the machine by unauthorized

service centers;

• Normal wear and tear;

• The tool has been abused, misused or

improperly maintained;

• Non-original spare parts have been used.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc PM506DC Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info