Bedienungsanleitung Vonroc PW506AC (Seite 6 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch)

778583

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

WWW.VONROC.COM

operation.

• The cross-section of any extension cables

used must be proportional to their length, i.e.

the longer the extension cable, the greater the

cross-section; cables with a protection level of

“IPX5” must be used.

• Position the cleaner AS NEAR POSSIBLE to the

water supply.

• The packaging is easily recyclable, and must be

disposed of in compliance with the regulations

in force in the country of installation.

• Use the cleaner only with accessories

and replacement parts authorized by the

manufacturer. The use of original accessories

and replacement parts will ensure safe,

troublefree operation.

• The cleaner must be used standing on a secure,

stable surface.

• Avoid unintentional ﬁring of the trigger. Do not

carry the lance/ trigger assembly with your

hand over the trigger. Always use the trigger

lock mechanism.

• Ensure that the safety lock on the trigger

is used, when you have stopped using the

pressure washer to prevent accidental

operation.

• Read all the instructions before using the

machine.

• Machines shall not be used by children.

Children should be supervised to ensure that

they do not play with the machine. This machine

is not intended for use by persons (including

children) with reduced physical, sensory or

mental capabilities, or lack of experience and

knowledge.

• The electrical supply connection shall be made

by a qualiﬁed person and comply with IEC

60364-1. The electric supply to this machine

should include a residual current device that

will interrupt the supply if the leakage current to

earth exceeds 30 mA.

• The machine is intended to be used at a

temperature above 0 degree. (Only for machine

with power cord of H05VV-F).

• The operating method to be followed in the

event of accident (e.g. contact with detergents:

rinse with an abundance of clean water) or

breakdown to prevent unsafe situations.

• This machine has been designed for use with

the cleaning agent supplied or recommended

by the manufacturer. The use of other cleaning

agents or chemicals may adversely affect the

safety of the machine.

• Recommend the operator to wear ear

protectors.

• Do not use the machine within range of persons

unless they wear protective clothing.

• Do not direct the jet against yourself or others

in order to clean clothes or foot-wear.

• Risk of explosion-Do not spray ﬂammable

liquids.

• High pressure hoses, ﬁttings and couplings

are important for the safety of the machine.

Use only hosed, ﬁttings and couplings

recommended by the manufacturer.

• To ensure machine safety, use only original

spare parts from the manufacturer or approved

by the manufacturer.

• Water that has ﬂown through backﬂow

preventers is considered to the non-potable.

• The machine shall be disconnected from its

power source by removing the plug from the

socket-outlet during cleaning or maintenance

and when replacing the machine to another

function.

• Observe a distance of at least 30cm when

using the jet to clean painted surfaces to avoid

damaging paintwork.

• Do not use the machine if a supply cord or

important parts of the machine are damaged,

e.g. safety devices, high pressure hoses, trigger

gun.

• If an extension cord is used, the plug and

socket must be of watertight construction.

• Inadequate extension cords can be dangerous.

If an extension cord is used, it shall be suitable

for outdoor use, and the connection has to be

kept dry and off the ground. It is recommended

that this is accomplished by means of a cord

reel which keeps the socket at least 60mm

above the ground.

• In order to avoid a hazard due to inadvertent

resetting of the thermal cut-out, this appliance

must not be supplied through an external

switching device, such as a timer, or connected

to a circuit that is regularly switched on and off

by the utility.

• To ensure the machine safety, please only use

original spare parts (including nozzle) from the

manufacturer or approved by the manufacturer.

Do not use the machine before you changed

them if they are damaged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc PW506AC Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info