Bedienungsanleitung Vonroc PW508DC (Seite 8 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

819197

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

WWW.VONROC.COM

Only use the following batteries of the VONROC

VPOWER 20V battery platform. Using any other bat-

teries could cause serious injury or damage the tool.

CD801AA 20V, 2Ah Lithium-Ion

CD803AA 20V, 4Ah Lithium-Ion

The following charger of the can be used to charge

these batteries.

CD802AA Quick charger

The batteries of the VONROC VPOWER 20V battery

platform are interchangeable with all the VONROC

VPOWER 20V battery platform tools.

DESCRIPTION

The numbers in the text refer to the diagrams on

pages 2-4.

1. Pressure washer

2. Lance extension

3. Adjustable spray nozzle

4. Water inlet

5. Hose connector

6. Hose connector ring

7. Suction hose

8. Floating ball

9. Suction ﬁlter

10. Switch lever

11. Release button

12. Bucket clamp

13. Detergent bottle

14. Battery unlock button

15. Battery

16. Battery LED indicators button

17. Battery LED indicators

18. Charger

19. Charger LED indicators

3. ASSEMBLY

Before any work on the power tool, remove

the battery.

The battery must be charged before ﬁrst use.

Assembly adjustable spray nozzle and lance exten-

stion (Fig. B)

1. Assembly the lance extension (2) on to the

pressure washer (1).

2. Assembly the adjustable spray nozzle (3) on to

the lance extension (2).

Inserting the battery into the machine (Fig. C)

Ensure that the exterior of the battery is

clean and dry before connecting to the

charger or machine.

1. Insert the battery (15) into the base of the ma-

chine as shown in Fig. C.

2. Push the battery further forward until it clicks

into place.

Removing the battery from the machine (Fig. C)

1. Push the battery unlock button (14).

2. Pull the battery out of the machine like shown

in Fig. C.

Checking the battery charging status (Fig. D)

• To check the battery charge status, push the

button (16) on battery shortly.

• The battery has 3 lights indicating the charge

level, the more lights that burn, the more

charge the battery has left.

•

When the lights are not burning it means the bat-

tery is empty and must be charged immediately.

Charging the battery with the charger (Fig. D)

1. Take the battery (15) from the machine.

2. Turn the battery (15) to upside down position

and slide it onto the charger (18) as shown in

Fig. D.

3. Push the battery until it is fully pushed into the

slot.

4. Plug the charger plug into an electrical outlet

and wait for awhile. The LED indicators (19) on

the charger (18) will lighten up and show the

charger status.

The charger has 2 LED indicators (19) which indi-

cate the status of the charging process:

Red LED Status Green LED status Charger status

Off Off No power

Off On

Standby mode:

- No battery is

inserted or,

- Battery inserted

but charging has

ﬁnished

On Off Battery charging in

progress

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc PW508DC Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info