Bedienungsanleitung Vonroc S-CS501DC (Seite 10 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Türkisch)

764092

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

WWW.VONROC.COM

Vibration level

The vibration emission level stated in this instruc-

tion manual has been measured in accordance

with a standardized test given in EN62841; it may

be used to compare one tool with another and as

a preliminary assessment of exposure to vibration

when using the tool for the applications mentioned.

• Using the tool for different applications, or with

different or poorly maintained accessories, may

signiﬁcantly increase the exposure level.

 The times when the tool is switched off or when

it is running but not actually doing the job, may

signiﬁcantly reduce the exposure level.

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work pat-

terns.

DESCRIPTION

The numbers in the text refer to the diagrams on

page 2-4.

1. Lock-off button

2. On/Off switch

3. Laser switch

4. Auxiliary handle

5. Laser

6. Scale for bevel angle

7. Wing bolt for bevel angle

8. Cutting mark, 45°

9. Cutting mark, 0°

10. Wing bolt for parallel guide

11. Handle

12A. Vacuum connection

12B. Vacuum adapter

13. Lever for retracting lower guard

14. Upper guard

15. Clamping bolt

16. Clamping ﬂange

17. Baseplate

18. Lower guard

19. Battery unlock button

20. Battery

21. Spindle lock

22. Wing bolt for depth adjustment

23. Scale for depth adjustment

24. Parallel guide

25. Laser adjustment screw

26. Battery LED indicators button

27. Battery LED indicators

28. Charger

29. Charger LED indicators

3. ASSEMBLY

Before any work on the power tool, remove

the battery.

The battery must be charged before ﬁrst use.

Inserting the battery into the machine (Fig. B, E)

Ensure that the exterior of the battery is

clean and dry before connecting to the

charger or machine.

1. Insert the battery (20) into the base of the ma-

chine as shown in Fig. E.

2. Push the battery further forward until it clicks

into place.

Removing the battery from the machine (Fig. B, E)

1. Push the battery unlock button (19)

2. Pull the battery out of the machine like shown

in Fig. E.

Checking the battery charging status (Fig. F)

• To check the battery charge status, push the

button (26) on battery shortly.

• The battery has 3 lights indicating the charge

level, the more lights that burn, the more char-

ge the battery has left.

•

When the lights are not burning it means the bat-

tery is empty and must be charged immediately.

Charging the battery with the charger (Fig. F)

1. Take the battery (20) from the machine.

2. Turn the battery (20) to upside down position

and slide it onto the charger (28) as shown in

Fig. F.

3. Push the battery until it is fully pushed into the

slot.

Plug the charger plug into an electrical outlet and

wait for a while. The LED indicators on the charger

(28) will lighten up and show the charger status.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc S-CS501DC Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info