Bedienungsanleitung Vonroc S-OS503DC (Seite 8 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

764076

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

WWW.VONROC.COM

5A. Upper grip

5B. Lower grip

6. Dust extraction port

7. Battery unlock button

8. Battery

9. Sanding paper

10. Rubber ring

11. Battery LED indicators button

12. Battery LED indicators

13. Charger

14. Charger LED indicators

15A. Vacuum connection

15B. Vacuum adapter

3. ASSEMBLY

Before any work on the power tool, remove

the battery.

The battery must be charged before ﬁrst use.

Inserting the battery into the machine (Fig. C)

Ensure that the exterior of the battery is

clean and dry before connecting to the

charger or machine.

1. Insert the battery (8) into the base of the machi-

ne as shown in Fig. C.

2. Push the battery further forward until it clicks

into place.

Removing the battery from the machine (Fig. C)

1. Push the battery unlock button (7).

2. Pull the battery out of the machine like shown

in Fig. C.

Checking the battery charging status (Fig. E)

• To check the battery charge status, push the

button (11) on battery shortly.

• The battery has 3 lights indicating the charge

level, the more lights that burn, the more char-

ge the battery has left.

•

When the lights are not burning it means the bat-

tery is empty and must be charged immediately.

Charging the battery with the charger (Fig. E)

1. Take the battery (8) from the machine.

2. Turn the battery (8) to upside down position and

slide it onto the charger (13) as shown in Fig. E.

3. Push the battery until it is fully pushed into the

slot.

4. Plug the charger plug into an electrical outlet

and wait for a while. The LED indicators on the

charger (13) will lighten up and show the char-

ger status.

The charger has 2 LED indicators (14) which

indicate the status of the charging process:

Red LED Status Green LED status Charger status

Off Off No power

Off On

Standby mode:

- No battery is

inserted or,

- Battery inserted

but charging has

ﬁnished

On Off Battery charging in

progress

• Fully charging the 2Ah battery may take up to

60 minutes.

• Fully charging the 4Ah battery may take up to

120 minutes.

After the battery is fully charged remove the char-

ger plug from the outlet and remove the battery

from the charger.

When the machine is not being used over a

longer period of time it is best to store the

battery in charged condition.

External dust extraction

The vacuum connection (15A) allows a vacuum cle-

aner to be attached to the machine. Also included

is a vacuum adapter (15B), which allows use of

smaller diameter vacuum pipes.

Connecting the dust bag (Fig. D)

It is highly recommended to use the machine with

the dust bag (2), ensuring optimal dust collection.

• Slide the dust bag (2) onto the dust extraction

port (6) using a slight twisting motion.

• Keep sliding in twisting motion until the dust

bag (2) is positioned slightly over the rubber

ring (10), ﬁxing it in place.

Note: The dust bag should be emptied when the

bag is half full to maintain optimal dust collection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc S-OS503DC Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info