Bedienungsanleitung Vonroc S-WC501AC (Seite 7 von 52) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Türkisch)

764060

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

WWW.VONROC.COM

6) Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replacement

parts. This will ensure that the safety of the

power tool is maintained.

Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

ADDITIONAL SAFETY WARNINGS

FOR

WALL CHASER

• Do not work materials containing asbestos.

Asbestos is considered carcinogenic.

• Wear safety goggles, hearing protection and

if necessary other protective means, such as

safety gloves, safety shoes, etc.

• Before use, remove all nails and other metal

objects from the wall.

• Be aware of hidden pipes and wiring when

cutting slots into walls.

• Always hold the machine with two hands.

• Do not use the machine without the guard.

• Inspect the cutting discs before each use.

Do not use cutting discs which are bent, crac-

ked, or otherwise damaged.

• Make sure that the cutting discs are properly

mounted.

• Make sure that the cutting discs rotate in the

correct direction.

• Do not use the machine with the cutting discs

facing upwards or to the side.

• Only use cutting discs that are suitable for use

with the machine.

•

Only use cutting discs with the correct dimensions.

• Do not use other accessories than cutting discs.

• Do not use the machine when a maximum slot

depth is required that exceeds the maximum

slot depth of the cutting discs.

• Make sure that your hands do not touch the

rotating parts.

• Always work in the correct working direction

(see indication on the base).

• Let the machine run at no load in a safe area

after mounting the cutting discs. If the machine

vibrates strongly, immediately switch off the

machine, remove the mains plug from the

mains, and try to solve the problem.

•

Beware that the cutting discs continue to rotate

for a short period after switching off the machine.

Do not attempt to bring the cutting discs to a

standstill yourself.

• Never put the machine down on a table or a

workbench before it has been switched off.

Kickback

Kickback is the upward and backward movement of

the cutting discs when the cutting discs unexpec-

tedly touch an object. Securely hold the machine

with both hands during use. Keep your attention

focused on the operation.

Kickback is usually caused by:

- unintentionally touching hard objects or materi-

als with the rotating cutting discs;

- blunt cutting discs;

- cutting discs that are not properly mounted;

- cutting into a previous cut;

- a lack of attention to the operation;

- an instable stance.

Electrical safety

Always check that the voltage of the power

supply corresponds to the voltage on the

rating plate.

• Do not use the machine if the mains cable or

the mains plug is damaged.

•

Only use extension cables that are suitable for

the power rating of the machine with a minimum

thickness of 1.5 mm

. If you use an extension

cable reel, always fully unroll the cable.

2. MACHINE INFORMATION

Intended use

Your wall chaser has been designed for making

slots in masonry. The machine is only suitable for

right-hand use.

TECHNICAL SPECIFICATIONS

Model No.

WC501AC, S_WC501AC,

S2_WC501AC

Mains voltage 230V~

Mains frequency 50Hz

Power input 1700W

No-load speed 4000 min

-1

Slot width 14/19/29mm

Slot depth 5-40mm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc S-WC501AC Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info