Bedienungsanleitung Vonroc S2-RH501DC (Seite 9 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

763983

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

WWW.VONROC.COM

• SDS drills can be inserted by pushing the drill

into the chuck until a click can be heard. If

needed rotate the SDS drill a little to ensure the

keyway in the bit ﬁts the chuck well.

DO NOT slide the locking sleeve (4) to the

rear when inserting bits.

• To remove the SDS drill, slide the locking sleeve

(4) to the rear and remove the SDS drill while

keeping the sleeve (4) in this position.

4. OPERATION

Hammer drills require very little operator

pressure. Excessive pressure on the tool

can lead to unnecessary overheating of the

motor, and burning of the driven tool. It also

may happen the drill bit deforms and

cannot be removed from the machine again.

The On/Off switch (Fig. A)

• Switch the machine on by pressing the On/Off

switch (1). When releasing the On/Off switch (1)

the machine will turn off.

• The rotation-speed can be continuously adjus-

ted by pressing the On/Off switch (1) deeper or

less deep.

Switching the direction of rotation (Fig. A)

• Direction of rotation counter-clockwise: shift

left/right switch (2) to “ ”.

• Direction of rotation clockwise: shift left/right

switch (2) to “ ”.

Function selection switch (Fig. A)

In order to avoid damage to the machine,

adjusting the function selection switch (5)

shall only be done when machine is not

running.

• Set the function selection switch (5) to “ ” for

drilling or screwing.

• Set the function selection switch (5) to “ ” for

hammer drilling.

User tips

• For large holes, for instance in very hard con-

crete, start using a smaller bit for pilot drilling

ﬁrst, then drill to nominal size.

• Hold the machine ﬁrmly with 2 hands. Be aware

the drill can jam and because of that machine

might suddenly turn (especially when drilling

deep holes).

• Do not apply a lot of pressure on the machine,

let the machine do the work.

5. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

battery pack from the machine.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that the

ventilation openings are free of dust and dirt. Re-

move very persistent dirt using a soft cloth moiste-

ned with soapsuds. Do not use any solvents such

as gasoline, alcohol, ammonia, etc. Chemicals such

as these will damage the synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected at

the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/EC

for Waste Electrical and Electronic Equipment and its

implementation into national right, power tools that

are no longer usable must be collected separately

and disposed of in an environmentally friendly way.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of defects

in both materials and workmanship for the period

lawfully stipulated starting from the date of original

purchase. Should the product develop any failure

during this period due to defective material and/or

workmanship then contact VONROC directly.

The following circumstances are excluded from this

guarantee:

• Repairs and or alterations have been made

or attempted to the machine by unauthorized

service centers;

• Normal wear and tear;

• The tool has been abused, misused or

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc S2-RH501DC Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info