Bedienungsanleitung Vonroc S2_PS502DC (Seite 8 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch, Schwedisch)

778557

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

WWW.VONROC.COM

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work patterns.

DESCRIPTION

The numbers in the text refer to the diagrams on

page 2-3.

1. On/off switch

2. Grip

3. Dust bag

4. Sanding pad

5. Sanding paper

6. Dust extraction port

7. Rubber ring

8. Battery

9. Battery unlock button

10. Battery LED indicators button

11. Battery LED indicators

12. Charger

13. Charger LED indicators

3. ASSEMBLY

Connecting the dust bag (Fig. B)

It is highly recommended to use the machine with

the dust bag (3), ensuring optimal dust collection.

• Slide the dust bag (3) onto the dust extraction

port (6) using a slight twisting motion.

• Keep sliding in twisting motion until the dust

bag (3) is positioned slightly over the rubber

ring (7), ﬁxing it in place.

Note: The dust bag should be emptied when the

bag is half full to maintain optimal dust collection.

Mounting and removing sanding paper (Fig. C)

• Hold the machine on its side or upside down, as

shown on Fig. C1.

• Mount sanding paper (5) with the required grain

size onto the sanding pad (4). Make sure that

the perforation in the sanding paper (5) corres-

ponds with the perforation on the sanding pad

(4), as shown on Fig. C2.

• To remove the sanding paper (5), simply pull the

sanding paper from the sanding pad (4).

Note: Use coarse sanding paper for sanding rough,

uneven surfaces. Use medium sanding paper for

removing the remaining scratches from the coarse

sanding paper. Use ﬁne sanding paper for ﬁnishing

surfaces.

Before any work on the power tool, remove

the battery.

The battery must be charged before ﬁrst use.

Inserting the battery into the machine (Fig. D)

Ensure that the exterior of the battery is

clean and dry before connecting to the

charger or machine.

Insert the battery (8) into the base of the machine

as shown in Fig. D.

2. Push the battery further forward until it clicks

into place.

Removing the battery from the machine (Fig. D)

1. Push the battery unlock button (9).

2. Pull the battery out of the machine like shown

in Fig. D.

Checking the battery charging status (Fig. D)

• To check the battery charge status, push the

button (10) on battery shortly.

• The battery has 3 lights indicating the charge

level, the more lights that burn, the more charge

the battery has left.

• When the lights are not burning it means

the battery is empty and must be charged

immediately.

Charging the battery with the charger (Fig. E)

1. Take the battery (8) from the machine.

2. Turn the battery (8) to upside down position and

slide it onto the charger (12) as shown in Fig. E.

3. Push the battery until it is fully pushed into the

slot.

4. Plug the charger plug into an electrical outlet

and wait for a while. The LED indicators on the

charger (13) will lighten up and show the charger

status.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc S2_PS502DC Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info