Bedienungsanleitung Vonroc S3-AG501DC (Seite 10 von 84) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

764087

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

WWW.VONROC.COM

Do not position your body in line with and

behind the rotating wheel. When the wheel, at

the point of operation, is moving away from your

body, the possible kickback may propel the spin-

ning wheel and the power tool directly at you.

c) When wheel is binding or when interrupting a

cut for any reason, switch off the power tool

and hold the power tool motionless until the

wheel comes to a complete stop. Never attempt

to remove the cut-off wheel from the cut while

the wheel is in motion otherwise kickback may

occur. Investigate and take corrective action to

eliminate the cause of wheel binding.

d) Do not restart the cutting operation in the

workpiece. Let the wheel reach full speed and

carefully re-enter the cut. The wheel may bind,

walk up or kickback if the power tool is restar-

ted in the workpiece.

Support panels or any oversized workpiece to

minimize the risk of wheel pinching and kick-

back. Large workpieces tend to sag under their

own weight. Supports must be placed under the

workpiece near the line of cut and near the edge

of the workpiece on both sides of the wheel.

Use extra caution when making a “pocket cut”

into existing walls or other blind areas. The prot-

ruding wheel may cut gas or water pipes, electri-

cal wiring or objects that can cause kickback.

SAFETY WARNINGS FOR BATTERY

Do not open the battery. Danger of short-circuiting.

b) Protect the battery against heat, e. g., against

continuous intense sunlight, ﬁre, water, and

moisture. Danger of explosion.

c) In case of damage and improper use of the bat-

tery, vapours may be emitted. Ventilate the area

and seek medical help in case of complaints.

The vapours can irritate the respiratory system.

d) Use the battery only in conjunction with your

Vonroc product. This measure alone protects

the battery against dangerous overload.

The battery can be damaged by pointed objects

such as nails or screwdrivers or by force applied

externally. An internal short circuit can occur and

the battery can burn, smoke, explode or overheat.

SAFETY WARNINGS FOR CHARGER

Intended use

Charge only CD801AA and CD803AA type rechargea-

ble Battery packs with the charger. Other types of bat-

teries may burst causing personal injury and damage.

a) The appliance is not to be used by persons

(including children) with reduced physical, sen-

sory or mental capabilities, or lack of experien-

ce and knowledge, unless they have been given

supervision or instruction.

b) Children being supervised not to play with the

appliance.

c) Do not recharging non-rechargeable batteries!

d) During charging, batteries must be placed in

the well ventilated area!

Electrical safety

Always check that the voltage of the power

supply corresponds to the voltage on the

rating plate.

• Do not use the machine if the mains cable or

the mains plug is damaged.

• Only use extension cables that are suitable

for the power rating of the machine with a

minimum thickness of 1.5 mm2. If you use a ex-

tension cable reel, always fully unroll the cable.

2. MACHINE INFORMATION

Intended use

Your angle grinder has been designed for grinding

masonry and steel materials without the use of

water. For cutting, a special protection guard

must be used (not included). Fig. F2.

TECHNICAL SPECIFICATIONS

Model No. S3_AG501DC

Voltage 20V

No load speed 8.000/min

Grinding disc

Diameter:

Bore:

115 mm

22.2 mm

Spindle thread M14

Weight 1.55 kg

Sound pressure level L

75.7 dB(A), K=3dB(A)

Acoustic power level L

86.7 dB(A), K=3dB(A)

Vibration a

h,AG

5.642 m/s

, K=1.5 m/s

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc S3-AG501DC Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info