Bedienungsanleitung Vonroc S3-CD509DC (Seite 8 von 78) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch, Schwedisch)

763970

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

WWW.VONROC.COM

4. OPERATION

Adjusting the direction of rotation (Fig. A)

• Set the direction switch (8) to position in

order to drive screws or to use it for drilling.

• Set the direction switch (8) to position in

order to remove screws.

Switching the machine on and off (Fig. A)

The on/off switch (5) is used for activating the

machine and adjusting rotation speed.

• Pressing the on/off switch (5) will activate the

machine, the further the switch is being pus-

hed, the faster the drill will turn.

• Releasing the on/off switch (5) will stop the

machine.

• Move the direction reversing switch (8) to the

middle position to lock the movement of the on/

off switch.

Only lay down the machine when it has

stopped running completely. Do not place it

on a dusty surface as particles of dust

could get into the mechanism.

Work light (Fig. A)

The machine is equipped with a work light (4) to

illuminate the work location.

• It automatically switches on when the on/off

switch is being pressed.

• It automatically switches off when the on/off

switch is released again.

5. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

battery pack from the machine.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that the

ventilation openings are free of dust and dirt. Re-

move very persistent dirt using a soft cloth moiste-

ned with soapsuds. Do not use any solvents such

as gasoline, alcohol, ammonia, etc. Chemicals such

as these will damage the synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected at

the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/EC

for Waste Electrical and Electronic Equipment and its

implementation into national right, power tools that

are no longer usable must be collected separately

and disposed of in an environmentally friendly way.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of defects

in both materials and workmanship for the period

lawfully stipulated starting from the date of original

purchase. Should the product develop any failure du-

ring this period due to defective material and/or work-

manship then contact VONROC directly. The following

circumstances are excluded from this guarantee:

• Repairs and or alterations have been made

or attempted to the machine by unauthorized

service centers;

• Normal wear and tear;

• The tool has been abused, misused or

improperly maintained;

• Non-original spare parts have been used.

This constitutes the sole warranty made by compa-

ny either expressed or implied. There are no other

warranties expressed or implied which extend

beyond the face hereof, herein, including the im-

plied warranties of merchantability and ﬁtness for

a particular purpose. In no event shall VONROC be

liable for any incidental or consequential damages.

The dealers remedies shall be limited to repair or

replacement of nonconforming units or parts.

The product and the user manual are subject to

change. Speciﬁcations can be changed without

further notice.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc S3-CD509DC Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info