Bedienungsanleitung Vonroc S3_PS502DC (Seite 6 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch, Schwedisch)

778558

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

WWW.VONROC.COM

temperature range speciﬁed in the instructions.

Charging improperly or at temperatures outside

the speciﬁed range may damage the battery and

increase the risk of ﬁre.

6) Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replacement

parts. This will ensure that the safety of the

power tool is maintained.

Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

ADDITIONAL SAFETY INSTRUCTIONS

• Do not use oversized sanding sheets, but follow

the manufacturer’s speciﬁcations for the size of

sanding sheets. Sanding sheets which project

over the sanding pad may cause injuries as well

as block and rip the sanding sheets or cause a

kickback.

• It is not recommended to sand lead paint. Lead

paint should be removed by a specialist only.

• Do not work on materials which release

hazardous substances (e.g. asbestos). Take

precautions if hazardous, combustible or

explosive dust is likely to occur. Wear protective

dust mask. Use dust extraction system.

• Do not work materials containing asbestos.

Asbestos is considered carcinogenic.

• Do not use the machine for sanding magnesium

workpieces.

• Wear safety goggles. Wear hearing protection.

If necessary, use other protective means, such

as safety gloves, safety shoes, etc.

• Hold the machine by the insulated gripping

surfaces where the accessory may contact

hidden wiring or the mains cable. If the

accessory contacts a ‚live‘ wire, the exposed

metal parts of the machine can also become

‚live‘. Risk of electric shock.

• Be very careful when sanding painted surfaces.

• Before use, remove all nails and other metal

objects from the workpiece.

• Make sure that the workpiece is properly

supported or ﬁxed.

• Only use sanding paper that is suitable for use

with the machine.

• Only use sanding paper with the correct

dimensions. Make sure that the sanding paper

is properly mounted.

• Inspect the sanding paper before each use.

Do not use sanding paper that is worn because

of prolonged use.

• Never put the machine down on a table or a

workbench before it has been switched off.

SAFETY WARNINGS FOR BATTERY

a) Do not open the battery. Danger of short-

circuiting.

b) Protect the battery against heat, e. g., against

continuous intense sunlight, ﬁre, water, and

moisture. Danger of explosion.

c) In case of damage and improper use of the bat-

tery, vapours may be emitted. Ventilate the area

and seek medical help in case of complaints.

The vapours can irritate the respiratory system.

d) Use the battery only in conjunction with your

Vonroc product. This measure alone protects

the battery against dangerous overload.

e) The battery can be damaged by pointed objects

such as nails or screwdrivers or by force

applied externally. An internal short circuit can

occur and the battery can burn, smoke, explode

or overheat.

SAFETY WARNINGS FOR CHARGER

Intended use

Charge only CD801AA and CD803AA type recharge-

able Battery packs with the charger. Other types

of batteries may burst causing personal injury and

damage.

a) The appliance is not to be used by persons

(including children) with reduced physical,

sensory or mental capabilities, or lack of expe-

rience and knowledge, unless they have been

given supervision or instruction.

b) Children being supervised not to play with the

appliance.

c) Do not recharging non-rechargeable batteries!

d) During charging, batteries must be placed in

the well ventilated area!

Electrical safety

Always check that the voltage of the power

supply corresponds to the voltage on the

rating plate.

• Do not use the machine if the mains cable or

the mains plug is damaged.

•

Only use extension cables that are suitable for

the power rating of the machine with a minimum

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc S3_PS502DC Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info