Bedienungsanleitung Vonroc S4_LM504DC (Seite 12 von 128) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch)

778579

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

WWW.VONROC.COM

CD802AA Quick charger

CD820AA Dual quick charger

The batteries of the VONROC VPOWER 20V battery

platform are interchangeable with all the VONROC

VPOWER 20V battery platform tools.

Vibration level

The vibration emission level stated in this instruc-

tion manual has been measured in accordance

with a standardized test given in EN60335; it may

be used to compare one tool with another and as

a preliminary assessment of exposure to vibration

when using the tool for the applications mentioned.

• Using the tool for different applications, or with

different or poorly maintained accessories, may

signiﬁcantly increase the exposure level.

• The times when the tool is switched off or when

it is running but not actually doing the job, may

signiﬁcantly reduce the exposure level.

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns.

DESCRIPTION

The numbers in the text refer to the diagrams on

pages 2-6.

1. Upper handle

2. On/off switch

3. Safety button

4. Power cable

5. Machine

6. Cable holder

7. Carrying handle

8. Wheel

9. Wheel cover

10. Grass box basket

11. Grass box lid

12. Grass box cover

13. Grass level indicator

14. Lower handle

15A. Handle adjustment knob

15B. Bolt for knob

16. Grass box carrying handle

17. Height adjustment lever

18. Grass outlet

19. Battery compartment cover

20. Battery bay

21. Safety key (isolator switch)

22. Battery unlock button

23. Battery

24. Battery LED indicators button

25. Battery LED indicators

26. Charger

27. Charger LED indicators

28. Blade

29. Blade bolt

30. Charger

31. Green LED indicators

32. Amber LED indicators

33. Red LED indicators

3. ASSEMBLY

Before any work on the power tool, remove

the battery.

The battery must be charged before ﬁrst

use.

Warning: Use only batteries which are

charged to the same level. Never combine

full and half-full batteries. Always charge

the two batteries simultaneously. The

equipment‘s operating time depends on the

battery with the lower charge level. The two

batteries must always be fully charged

before use.

Inserting the battery into the machine (Fig. A, J)

Ensure that the exterior of the battery is

clean and dry before connecting to the

charger or machine. Close the battery cover

before use.

1. Open the battery compartment cover (19).

2. Insert the battery (23) into the battery bay (20)

as shown in Fig. J.

3. Push the battery further forward until it clicks

into place.

4. Repeat for the other battery (23).

5. Close the battery compartment cover (19).

Removing the battery from the machine (Fig. A, J)

1. Open the battery compartment cover (19).

2. Pull the battery (23) out of the battery bay (20)

as shown in Fig. J.

3. Repeat for the other battery (23).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc S4_LM504DC Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info