Bedienungsanleitung Vonroc TL501XX (Seite 7 von 32) (Deutsch, Englisch, Holländisch, Französisch)

764128

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

WWW.VONROC.COM

• For frequent users, regular periodic inspection

is required.

• Before using a ladder at work, a risk assess-

ment should be carried out respecting the legis-

lation in the country of use.

• Ensure the ladder is suitable for the task. If

unsure, contact a qualiﬁed person for guidance.

• Do not use a damaged or otherwise unsuitable

ladder.

POSITIONING AND ERECTING THE LADDER

• Ensure the ladder is fully collapsed, all locks are

secured and the ladder is free from contami-

nants before moving to the area of work. Only

erect and close in a safe work area. Do not move

the ladder when erect.

• Only position and use the ladder on an even, level

and unmoveable base.

• When positioning the ladder, take into account

risk of collision with the ladder e.g. from pedes-

trians, vehicles or doors.

• Secure doors (not ﬁre exits) and windows where

possible in the area.

• Identify any electrical risks in the work area, such

as overhead lines or other exposed electrical

equipment. This ladder does not offer insulation

or protection from electrical hazards.

• Take extra care when using electrical equipment,

this ladders conducts electric current. Always

take precautions so that a power cable cannot

become trapped or become caught when using

the ladder. Check beforehand that your tool’s

electrical cable is undamaged. Keep the ladder

at least 2m away from non-insulated live electri-

cal equipment.

• The ladder shall be only be positioned ﬂat on its

feet, not the rungs or steps. Never position or

use the ladder on slippery surfaces (such as ice,

shiny surfaces or signiﬁcantly contaminated solid

surfaces) unless additional effective measures

are taken to prevent the ladder slipping or ensu-

ring contaminated surfaces are sufﬁciently clean.

• The ladder shall be erected at the correct positi-

on, such as the correct angle for a leaning ladder

(angle of inclination approximately 1:4) with the

rungs or treads level (e.g. 1m away from the base

of a wall if extending to climb 4m up).

• Always position the ladder against a ﬂat, non-fra-

gile surface and secure properly before use e.g.

tied down or with the use of a suitable stability

device.

• The locking mechanisms for all the extended

rung sections shall be locked before using the

ladder.

• Never attempt to move or reposition the ladder

from above.

USING THE LADDER

• Do not exceed the maximum total load of

150kg/330lbs for this ladder.

• Only allow one person to use the ladder at any

time.

• Ladders should only be used for light work of

short duration.

• Use non-conductive ladders for unavoidable live

electrical work. This ladder is not suitable for

live electrical work as it is conductive and offers

no protection from electrical hazards.

• Never erect or use the ladder upside down. The

base should always sit ﬁrmly on the ground.

• Do not use the ladder outside in adverse we-

ather conditions, such as strong wind or rain.

• Do not leave an extended ladder unattended.

• Take precautions against children playing on

the ladder.

• Do not place any tools or other objects on the

rungs and do not hang anything on the ladder

system.

• Equipment carried while using a ladder should

be light and easy to handle.

• Face the ladder and keep a secure grip when

ascending and descending.

• Do not slide down the stiles of the ladder. Climb

and descend with deliberate movements.

• Always maintain 3 points of contact with the

ladder at all times e.g. two feet on the same

rung and a hand on the stiles. Use additional

safety equipment if this is not possible.

• Maintain a handhold whilst working from a

ladder or take additional safety precautions if

you cannot.

• Do not overreach; always keep your belt buckle

(navel) inside the stiles and both feet on the

same step/rung throughout the task.

• Avoid work that imposes a sideways load on

ladders, such as side-on drilling through solid

materials (e.g. brick or concrete).

• In the leaning ladder position it is not allowed to

climb higher than last metre of the ladder.

• The user shall put the hands around the stile

when bringing the ladder from extended to

storage position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc TL501XX Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info