Bedienungsanleitung Vonroc TM501XX (Seite 5 von 36) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch)

778594

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

WWW.VONROC.COM

1. SAFETY INSTRUCTIONS

Read the enclosed safety warnings, the additional

safety warnings and the instructions. Failure to

follow the safety warnings and the instructions may

result in electric shock, ﬁre and/or serious injury.

Save the safety warnings and the instructions for

future reference.

The following symbols are used in the user manual

or on the product:

Read the user manual.

Denotes risk of personal injury, loss of life

or damage to the tool in case of non-obser-

vance of the instructions in this manual.

Not intended for use by children.

SAFETY WARNINGS

Please read these instructions carefully and

thoroughly before using this product and keep

them for future reference. It is important that you

understand how to use this product correctly, so

please take the time to familiarize yourself with the

requirements as outlined in these instructions.

• If you are in any doubt about using this product,

it is strongly recommended to employ the servi-

ces of a suitably qualiﬁed expert.

• Please consult the manual for your TV and en-

sure that the weight and size of the TV is within

the limits speciﬁed for this product

• Note that not all of the supplied mounting

accessories provided may be required for the

installation of your speciﬁc TV.

• The mounting accessories provided are ex-

clusively intended for installation onto strong

supporting structures such as solid brick, solid

concrete or solid wood columns.

2. PRODUCT INFORMATION

Model no. TM501XX

Dimensions 660 x 435mm

Wall clearance 34mm

Weight 1,6kg

Max. supported screen weight 60kg

Supported screen diagonal 37” to 85”

Supported VESA patterns 600 x 400

400 x 400

400 x 300

400 x 200

300 x 300

300 x 200

200 x 200

DESCRIPTION

1. Wall plate

2. TV support arm

3. Unlocking cord

4. Spririt level

5. Hardware kit

3. INSTALLATION

Before installation

Ensure that your TV is compatible with this

wall mount before proceeding the

installation.

Ensure that the supporting wall is capable

of sustaining the combined weight of this

wall mount and the TV.

Attach Wall Plate to Wall

Choose option A or B depending on your wall

construction.

Option A: Installing in drywall with timber supports

(Figure D)

If you are installing this TV wall mount using

this method, you must spread the wall plate

across 2 wall studs. Do not attach the wall

plate to a single wall stud in the center of

the wall plate.

1. Locate the center of two adjacent timber studs

using a stud ﬁnder.

You must use the center of the stud to avoid

cracking or splitting the timber during

installation.

2. Mark a minimum of four mounting holes over

the stud centers using the wall plate as a guide.

Position two holes at either end of the wall plate

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc TM501XX Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info