Bedienungsanleitung Vonroc TT501XX (Seite 5 von 26) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

778572

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

WWW.VONROC.COM

TECHNICAL SPECIFICATIONS

Model No. TT501XX

Max load capacity 80 kg

Stap length 1.5 m

Dimensions (folded) 380x50x700mm

Dimensions (unfolded) 380x374x960mm

Product weight 2.8 kg

DESCRIPTION

The numbers in the text refer to the diagrams on

pages 2-3.

1. Handle

2. Frame

3. Handle knob

4. Load plate

5. Wheel

3. OPERATION

Unfolding for usage (Fig. A, B1, B2)

1. Pull the handle (1) upwards until the handle

knob (3) is locked automatically.

2. Push down the load plate (4), the wheels (5)

will automatically fold out with the load plate

(4).

Folding for storage (Fig. A, C1, C2)

1. Pull the handle knob (3) backwards and slide

the handle (1) down.

2. Pull the load plate (4) towards the frame (2).

Be careful the wheels (5) will automatically folds

up towards the back of the frame (2).

Loading the load plate

• Check if the hand truck is properly unfolded.

• Lean the hand truck slightly forward. So the load

plate can be pushes directly under the load.

• Tilt the load and push the hand truck under the

load as far as possible.

• Tilt the hand truck into the transport position.

To unload the load from the hand truck, proceed in

reverse order.

4. MAINTENANCE

Risk of damage! Improper handlining of the

hand truck can lead to damages. Always

check product for damage before ﬁrst use.

Check regularly that the hand truck is in perfect

condition, re-tighten the screws if necessary and

make sure the frame engages correctly.

Clean the product

• Never use mineral spirits, solvents or aggres-

sive cleaning agents for cleaning.

• Clean the product with a damp cloth and , if

necessary, with a mild detergent.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of

defects in both materials and workmanship for the

period lawfully stipulated starting from the date of

original purchase. Should the product develop any

failure during this period due to defective material

and/or workmanship then contact VONROC directly.

The following circumstances are excluded from this

guarantee:

• Repairs and or alterations have been made

or attempted to the machine by unauthorized

service centers;

• Normal wear and tear;

• The tool has been abused, misused or improp-

erly maintained;

• Non-original spare parts have been used.

This constitutes the sole warranty made by

company either expressed or implied. There are

no other warranties expressed or implied which

extend beyond the face hereof, herein, including the

implied warranties of merchantability and ﬁtness for

a particular purpose. In no event shall VONROC be

liable for any incidental or consequential damages.

The dealers remedies shall be limited to repair or

replacement of nonconforming units or parts.

The product and the user manual are subject to

change. Speciﬁcations can be changed without

further notice.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc TT501XX Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info