Bedienungsanleitung Vonroc VC504AC (Seite 9 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch)

764123

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

WWW.VONROC.COM

11. Press the power switch (1) into the “ OFF/0”

position to switch off your vacuum cleaner.

For automatic mode vacuuming

(working with power tools):

8. Adapt the power tool adapter (25) to the dust

extraction outlet of the power tool. Using a knife

if necessary.

9. Connect the power tool adapter (25) to the han-

dle adapter (18) and connect it to the power tool

dust extraction outlet.

10. Connect the mains plug of the power tool to the

power socket (15).

11. Connect the mains plug.

12. Press the power switch (1) into the “ Automatic

mode / II” position and start working to start your

vacuum cleaner. The vacuum cleaner is automat-

ically switched on/off via the power tool. As soon

as the power tool is switched on, the vacuum

cleaner starts with some delay. If the power tool

is switched off, the vacuum cleaner continues to

run for some seconds in order to vacuum up the

remaining dirt in the suction hose (17).

13. Press the power switch (1) into the “ OFF/0” posi-

tion to switch off your vacuum cleaner.

Wet vacuuming (Fig. A, C, E – F, H)

The vacuum cleaner is equipped with a ﬂoat

(30). The suction power decreases when

the maximum ﬁlling level is reached. Switch

the vacuum cleaner off (1) immediately.

Remove the plug from the socket and

empty the container (8).

Clean the ﬂoat (30) at regular intervals, and

check it for damage. Otherwise, its function

can be impaired.

Never reach into the water to be suctioned

up. Danger of electric shock.

Immediately switch (1) the machine off if

foam forms or liquids escape!

Do not use a dust collection bag (26)!

1. Press the power switch (1) into the “ OFF/0” posi-

tion and remove the mains plug from the mains.

2. Unlock the locking clamp (7) and remove the

top section (6).

3. Before wet vacuuming, remove the dust collec-

tion bag (26), the HEPA ﬁlter (27) and remove all

dirt and debris from the container (8).

4. Carefully slide foam ﬁlter (28) down over the ﬁlter

cage (31) making sure the whole cage (31) is

covered as shown in Fig. C-2.

5. Reattach the top section (6) again and lock the

locking clamp (7).

6. Insert one end of the hose (17) into the vacuum-

ing port (14). Fully unwind the suction hose (17).

7. Connect the mains plug.

8. Press the power switch (1) into the “ ON/I” posi-

tion to start your vacuum cleaner.

9. The machine now is ready for wet vacuum

cleaning.

10. Press the power switch (1) into the “ OFF/0” posi-

tion to switch off your vacuum cleaner.

11. Raise the hose (17) so that the liquids drains into

the container (8).

12. Empty the container (8) immediately after suction

cleaning because it is not designed to store

liquids.

Blow function (Fig. A, E – F)

Operation without the use of a ﬁlter is

recommended.

Remove all dirt and debris from the

container (8) before you use the blow

function.

Always wear safety goggles before using

the blowing function.

Risk of ﬂying objects. Keep bystanders

away from the work area.

Your vacuum cleaner is equipped with a blowing

function. It can be used to blow dust and debris.

1. Press the power switch (1) into the “ OFF/0” posi-

tion and remove the mains plug from the mains.

2. Unlock the locking clamp (7) and remove the top

section (6).

3. Before blowing, remove the dust collection bag

(26), the ﬁlter (27, 28) and remove all dirt and

debris from the container (8).

4. Reattach the top section (6) again and lock the

locking clamp (7).

5. Insert one end of the hose (17) into the blowing

port (3) on top of machine. Fully unwind the

suction hose (17).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc VC504AC Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info