Bedienungsanleitung Vonroc VC507DC (Seite 7 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

819206

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

WWW.VONROC.COM

The charger has 2 LED indicators (19) which

indicate the status of the charging process:

Red LED Status Green LED status Charger status

Off Off No power

Off On

Standby mode:

- No battery is

inserted or,

- Battery inserted

but charging has

ﬁnished

On Off Battery charging in

progress

• Fully charging the 2Ah battery may take up to

60 minutes.

• Fully charging the 4Ah battery may take up to

120 minutes.

After the battery is fully charged remove the

charger plug from the outlet and remove the

battery from the charger.

• Slide the HEPA ﬁlter (12) over the ﬁlter

holder(13) as shown in Fig. D.

Clean the HEPA ﬁlter (12) regularly and

after every heavy use to maintain the

suction power.

• Place the top section (8) on the container (7) as

shown in Fig. E-1.

• Secure the metal locking clamps (5) of the

container to the top section (8) as show in Fig.

E-2.

• Close the metal locking clamps (5) by pushing

them downwards.

• Connect the suction hose (9).

For vacuuming (Fig. F): Connect the suction

hose (9) to the vacuum port (3).

For blowing (Fig. G): Connect the suction hose

(9) to the blowing port (4).

• Connect the round nozzle (10) or the crevize

nozzle (11) to the hose (9).

4. OPERATION

Switching the machine on/off (Fig.A)

Do not vacuum without a Hepa ﬁlter!

• To switch on the vacuum cleaner, move the On/

Off switch (1) forwards (direction ON).

• To switch off the vacuum cleaner, move the On/

Off switch (1) backwards (direction OFF).

Vacuuming (Fig. D, E-1, E-2, F)

Clean the HEPA ﬁlter (12) regularly and

after every heavy use to maintain the

suction power.

Fine dust, such as dust from cement, soot

and plaster are too ﬁne to be used. Risk for

getting into the motor and damaging it.

1. Switch off (1) the machine and remove the

battery (14).

2. Unlock the metal locking clamps (5) and remove

the top section (8).

3. Before vacuuming, remove all dirt and debris

from the container (7).

4. Fit the ﬁlter. Carefully slide the HEPA ﬁlter (12)

over the ﬁlter holder (13) as shown in Fig. D.

5. Place the top section (8) on the container (7) as

shown in Fig. E-1.

6. Reattach the top section (8) again and lock the

locking clamps (5). Fig E-2.

7. Insert one end of the hose (9) into the

vacuuming port (3).

8. Place the battery (14).

9. Press the power switch (1) into the “

ON/1”position to start your ash cleaner.

10. The machine now is ready to use for vacuum

cleaning.

11. Press the power switch (1) into the “

OFF/0”position to switch off your ash cleaner.

Blow function (Fig. E-1, E-2, G)

Operation without the use of a ﬁlter is

recommended.

Remove all dirt and debris from the

container(7) before you use the blow

function.

Always wear safety goggles before using

the blowing function.

Risk of ﬂying objects. Keep bystanders

away from the work area.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc VC507DC Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info