Bedienungsanleitung Vonroc VC508DC (Seite 9 von 108) (Alle Sprachen)

819195

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

WWW.VONROC.COM

4. Plug the charger plug into an electrical outlet

and wait for a while. The LED indicators on the

charger (25) will lighten up and show the char-

ger status.

The charger has 2 LED indicators (25) which indi-

cate the status of the charging process:

Red LED Status Green LED status Charger status

Off Off No power

Off On

Standby mode:

- No battery is

inserted or,

- Battery inserted

but charging has

ﬁnished

On Off Battery charging in

progress

• Fully charging the 2Ah battery may take up to

60 minutes.

• Fully charging the 4Ah battery may take up to

120 minutes.

After the battery is fully charged remove the char-

ger plug from the outlet and remove the battery

from the charger.

When the machine is not being used over a

longer period of time it is best to store the

battery in charged condition.

Assembly of the ﬁlter (Fig. E - G)

1. Remove the top section (7) of the container (8)

as shown in Fig. E.

2. Assemble the ﬁlter. Ensure to mount the correct

ﬁlter, depending on the application:

• For dry vacuum cleaning, carefully slide

the HEPA ﬁlter (14) over the ﬁlter cage (15)

making sure the entire cage (15) is covered

as shown in Fig. F1.

• For wet vacuum cleaning, carefully slide

the foam ﬁlter (13) over the ﬁlter cage (15)

making sure the entire cage (15) is covered

as shown in Fig. F2.

3. Place the top section (7) on the container (8) as

shown in Fig. E.

Connecting the hose (Fig. D1, D2).

• For vacuuming (Fig. D1), connect the suction

hose (12) to the vacuum port (10).

• For blowing (Fig. D2), connect the suction hose

(12) to the blowing port (9).

Connect the desired nozzle.

Triangular nozzle (18)

The triangular nozzle is designed for domestic wet

and dry vacuuming in, for example, the house, work

room, or garage.

Crevice nozzle (19)

The crevice nozzle is designed for domestic wet

and dry vacuuming, edges and other areas that are

difﬁcult to access.

Car vacuum tool (20)

The brush is designed to vacuuming solids from

small areas. For example from car seats.

Power tool adapter (21)

Adapter for connecting suction hose with a power

tool.

4. OPERATION

If the vacuum cleaner accidentally tips over,

the shut-off ﬂoat (16) mechanism may

cover the motor vacuum port and stop the

suction. If this happens, simply stand the

cleaner upright and turn it off until the ﬂoat

(16) returns to its normal position.

Do not vacuum without a ﬁlter!

Switching the machine on/off

• Press the power switch (1) into the “ON/I” posi-

tion to start your vacuum cleaner.

• Press the power switch (1) into the “OFF/0”

position to switch off your vacuum cleaner.

Dry vacuuming (Fig. D1, G)

Clean the HEPA ﬁlter (14) regularly to

maintain the suction power.

To avoid the HEPA ﬁlter (14) becoming

clogged, we recommend the additional use

of a dust collection bag (17).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc VC508DC Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info