Bedienungsanleitung Vonroc WB501XX (Seite 6 von 24) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

764133

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

WWW.VONROC.COM

DESCRIPTION

The numbers in the following text refer to the pictu-

res on pages 2-4.

1. Screw

2. Bolt, nut, washer M6

3. Bolt, nut, washer M8

4. Wrench

5. Plastic foot

6. Bench clamp

7. Slide base

8. Crossbar

9. Table

10. Leg frame

3. ASSEMBLY

Fig. A

• Lay the Table tops (9) down with the screw

holes facing up.

Fig. B

• Fasten both Slide bases (7) onto the Table tops

(9) using the screws (1).

• Make sure the screws are tightened securely,

without overtightening.

Fig. C

• Connect the Leg frames (10) to the Slide bases

(7) by using the Bolt, nut, washer M8 (3).

If you prefer, you can do this while keeping the

workbench turned upside down.

•

Do not overtighten the Bolts (3), as this will

prevent the workbench from folding and unfolding

easily.

Fig. D

• Place the Crossbars (8) onto the Leg frames

(10). Fasten by using the Bolt, nut, washer M6

(2). If you prefer, you can do this while keeping

the workbench turned upside down.

• Make sure the screws are tightened securely,

without overtightening.

Fig. E

• Attach the Plastic feet (5) to the legs.

• Note: The plastic feet are not symmetrical. The

‘highest’ part should be facing the outer corner

of the leg.

Fig. F

• Insert the Bench clamps (6) into one of the

holes of the Table tops (9).

4. OPERATION

Fig. G

To clamp a workpiece in the vice jaws, turn the

hand cranks in clockwise direction. To unclamp a

workpiece in the vice jaws, turn the hand cranks

anticlockwise.

Fig. H

When unfolding the workbench, make sure to push

the folding braces downwards.

To fold the workbench, ﬁrst use the hand cranks

to fully clamp the vice jaws. Then push the folding

braces in upwards direction as shown in the ﬁgure

and fold the workbench. If this is difﬁcult to do,

slightly loosen the screws shown in ﬁgure C.

5. MAINTENANCE

The workbench is designed to function

faultlessly for a long period and with a

minimum of maintenance. Extend its

lifespan by regularly cleaning the machine

and treating it correctly.

Cleaning

Regularly clean the workbench, preferably after

each use. Clean with a suitable proprietary house-

hold cleaner and a soft dry cloth. Do not submerge

your workbench in water or any liquid for any rea-

son. Do not use solvents (petrol, alcohol, ammonia,

etc.) as they will damage the plastic parts.

Storage

Store your workbench indoors in a dry environment

away from contaminants. Only store the workbench

when it is dry. Do not subject your workbench to

humid or damp environments, these can damage

the workbench. Store out of reach of children. Store

ﬂat or hang from the wall.

Maintenance

Never use a damaged or broken clamping work-

bench. Temporary repairs are not permitted. Check

the plastic feet of the workbench before and after

use of the workbench. Do not use the workbench

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc WB501XX Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info