VHF BODYPACK
1. Power ON/OFF
2. Microphone input Jack for headset.
3. Antenna
4. Power On/Off LED indicator
5. Battery Cover: Open it to install the battery.
6. Display
7. Belt Clip
Attention: If the bodypack are not used for a longer period, please remove the batteries to
prevent damage in case of battery leakage!
HEADSET MICROPHONE
Connect the connecter of supplied headset microphone to the connecting jack of transmitter (Shown as below).
OPERATION
1. Switch on the microphone receiver with the power switch. The display indicates the preset transmission channels and
frequencies.
2. Switch on the hand-held microphone or bodypack. The power indicator lights. If it fails to light up, a new battery must
be inserted.
3. Switch on the following audio unit (e.g. amplifier or mixer).
4. Speak into each microphone and match the output level of the receiver to the input of the following unit with the
respective level control.
5. After operation switch off the receiver and the microphones.
For optimum receiving:
• Make sure that maintain a line-of-sight between the microphones and receiver antennas.
• Make sure the distance between the microphones and the receiver is not too long.
• Make sure the reception is not disturbed by objects in the transmission path, avoid metal or other dense materials may
be present and computers or other HF-generating equipment.
• Make sure the batteries of are always sufficiently charged.
No license required (excluding geographical restrictions)
Austria (AT), France (FR), Germany (DE), Greece (GR), Hungary (HU), Netherlands (NL), Poland (PL), Romania (RO),
Slovenia (Sl), Switzerland (CH)
Please contact your radio licensing authority in your country, who will advise you on the available frequencies and
transmitter power requirements.
