Bedienungsanleitung VTech DM1111 (Seite 1 von 2) (Englisch)

809774

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

NOTE

• Make sure the POWER / LINK light is on after the

power plug is fully inserted into the power jack of

the parent unit.

• Make sure the baby unit is on. If the parent

unit is not linked to the baby unit, the

POWER / LINK light on the parent unit will flash.

Move the parent unit closer to the baby unit (but

not less than 6.5 feet / 2 metres).

• Make sure the POWER light is on after the power

plug is fully inserted into the power jack of the

baby unit.

Charge the parent unit battery

When you have connected the parent unit

and installed its battery for the first time or

after power outage, the parent unit powers on

automatically.

NOTE

• The parent unit battery is fully charged after 16

hours of continuous charging.

• It takes longer to charge the battery when the

parent unit is turned on. To shorten the charging

time, turn the parent unit off while charging.

• The standby time varies depending on the volume

level you set, your actual use and the age of battery.

Before use

NOTE

• This baby monitor should be for use by adults

only.

• It is not a substitute for proper adult supervision,

and should not be used as such.

Test your baby monitor

You may test the baby monitor before initial

use, and at regular times thereafter.

CAUTION

• For hearing protection, make sure the

parent unit is more than 6.5 feet (2 metres)

away from the baby unit. If you hear any

feedback, move the parent unit further until

the noise stops. You can also press on

the parent unit to lower or mute the noise.

1. Make sure your baby unit and parent unit

are on.

2. Speak towards the microphone of the baby

unit. You will hear the sound at the parent unit,

and see the visual sound indicators light up.

NOTES

• When the POWER/LINK LED light flashes, move

the parent unit closer to the baby unit (observe the

minimum distance of 6.5 feet / 2 metres). You can

also check if the baby monitor is connected to a

live power socket and switched on.

TIP

• Increase the speaker volume of the parent unit if

you cannot hear the sounds transmitted from the

baby unit.

Positioning the baby monitor

CAUTION

• Keep the baby unit out of the reach of your baby.

Never place or mount the baby unit inside the

baby’s cot or playpen.

1. Place the baby unit more than 3 feet

(1 metre) away from your baby.

2. Place the parent unit more than 6.5 feet

(2 metres) away from the baby unit.

CAUTION

• The default volume of your parent unit is Level 3,

and the maximum volume is level 5. If you

experience feedback from your baby monitor

while positioning:

-Make sure your baby unit and parent unit are

more than 6.5 feet (2 metres) apart, OR

-Turn down the volume of your parent unit.

Operating range

The operating range of the baby monitor is up

to 1,500 feet (450 metres) outdoors or 160 feet

(50 metres) indoors. The actual operating range

may vary depending on the environmental

conditions and other interferences such as

walls, doors and other obstructions.

Overview

Baby unit overview

1 (On/off)

Press and hold to turn on or off the

baby unit.

2Microphone

3POWER light

4Power jack

Parent unit overview

1 Speaker

2 (On/off)

Press and hold to turn on or off the

parent unit.

3 (Volume up)

• Press to increase the speaker

volume.

4POWER / LINK light

5Power jack

6Visual sound indicator

• Indicate the sound level detected by

the baby unit or show the volume

level during speaker volume setting.

7 (Volume down)

• Press to decrease the speaker

volume.

• Press repeatedly until the volume

reaches the minimum to mute the

parent unit.

8 (Low battery light)

9Belt clip

10 Battery compartment cover

Baby unit light

POWER

POWER light

• Lights off when the baby unit is

off.

• Lights on in green when the baby

unit is on.

Parent unit lights

POWER / LINK

POWER / LINK light

• Lights off when the parent

unit is off.

• Lights on in green when the

parent unit is on and linked

to the baby unit.

• Flashes in green when there

is no link between the baby

unit and parent unit, or when

the parent unit is out of

range from the baby unit.

Visual sound indicator

The visual sound indicator has

two functions. One is to show

the sound level detected by

the baby unit. The other one

is to show the volume level

during speaker volume setting.

Sound level detected by the

baby unit

• One to three green lights

indicate a moderate sound

level detected by the baby

unit.

• Additional red lights indicate

a higher sound level

detected by the baby unit

(e.g. baby crying loudly).

Speaker volume level

• One to three green lights

indicate Level 1 to Level

3 of the speaker volume

setting.

• Additional red lights indicate

Level 4 to Level 5 of the

speaker volume setting.

Flashes in red when the

battery is low.

Parent unit alert tones

Low

battery

tone

• Beeps twice every 10 minutes

when the battery is low.

Out of

range

tone

• Beeps three times every 30

seconds when there is no link

between the baby unit and

parent unit, or when the parent

unit is out of range from the baby

unit.

Congratulations

on purchasing your new VTech product. Before

using this product, please read Important

safety instructions.

This manual has all the feature operations

and troubleshooting necessary to install and

operate your new VTech product. Please

review this manual thoroughly to ensure proper

installation and operation of this innovative and

feature rich VTech product.

What’s in the box

Install batteries for

temporary use

We recommend that you use the power

adaptor power up the parent unit for normal

use. If you want to move around the house

with the parent unit, install the rechargeable

batteries provided for temporary use.

NOTE

• Use only the rechargeable batteries provided

(1.2V AAA 400mAh Ni-MH). If you use other kind

of batteries, the performance of the baby monitor

varies.

• Do not mix old and new batteries. Do not mix

alkaline, standard (Carbon-Zinc) or rechargeable

(Ni-Cad, Ni-Mh, etc) batteries.

• While you insert the batteries, make sure the

polarities are correct.

• When the batteries are installed, the parent unit

turns on.

• Replace the batteries when the light flashes

on the parent unit, or you hear two beeps every

10 minutes.

Install the batteries as shown below.

1. Press down on the battery compartment

cover to slide it out.

2. Insert the rechargeable batteries into the

battery compartment, according to the

polarity indications (+) and (-).

3. Slide the battery compartment cover until it

clicks into place.

Replace the battery

To replace the two batteries (1.2V AAA

400mAh Ni-MH), slide open the battery

compartment cover, and then take out the

batteries. Follow the previous steps to install

the new batteries.

Connect

NOTE

• Use only the power adaptors supplied with this

product.

• The power adaptors are intended to be correctly

oriented in a vertical or floor mount position. The

prongs are not designed to hold the plug in place if

they are plugged into a ceiling, under-the-table or

cabinet outlet.

• Make sure the parent unit, the baby unit and the

power adaptor cords are out of reach of children.

• Both the baby unit and the parent unit are on once

connected to the power supply.

Connect the baby monitor

User’s manual

DM1111

Digital Audio Monitor

> 1 metre

< 2 metres

> 2 metres

VTech DM1111 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von VTech DM1111

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info