809773
2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
Overview - Parent unit
1
6
11
10
2
3
5
7
8
9
12
13
14
4
1Visual sound indicator
The visual sound indicator shows the
sound level detected by the baby unit.
One to three green
lights indicate a moderate sound level
detected by the baby unit.
Additional red lights
indicate a higher sound level
detected by the baby unit (e.g. baby
crying loudly).
2LCD display
3 Microphone
4
Press to decrease the speaker
volume.
Press repeatedly until the volume
reaches the minimum to turn it off.
While in a menu, press to scroll down.
5
While in a menu, press to return to
the previous menu.
6Speaker
7 Battery LED
Light on when the battery is being
charged.
Light flashes when the battery is low
and needs charging.
Light off when the parent unit is
running on AC power without battery
installed, or the parent unit is running
on battery only.
8
Press to increase the speaker volume.
While in a menu, press to scroll up.
9 Menu/Select
Press to enter the menu.
While in a menu, press to choose an
item, or save a setting.
10 On/Off
Press and hold to power on, the
screen turns on.
Press and hold again to power off,
the screen turns off.
While in a menu, press to return to
idle screen.
11 Talk
Press and hold to talk to the baby unit.
12 Power jack
13 Belt clip
14 Battery compartment cover
Parent unit icons
Parent unit screen messages
LINKED The link between
the parent unit and
the baby unit is
established.
LOW BATTERY The parent unit
uses only the
rechargeable
battery pack and
it needs to be
recharged.
NOT LINKED The link between
the parent unit and
the baby unit is lost
continuously for
over 10 seconds.
SEARCHING The parent unit is
out of range of the
baby unit, or the
baby unit is out of
power.
TALK You are using the
parent unit to talk
to your baby.
MUTE The parent unit
speaker volume is
turned off.
1
6
11
10
2
3
5
7
8
9
12
13
14
4
Adjust the sound sensitivity of the baby unit
You can choose to hear sounds from the baby unit all the time, or to only hear sounds that
exceed a certain level. Use the parent unit to adjust the VOX sensitivity of your baby unit to
detect sounds. The higher the sensitivity level, the more sensitive the baby unit is in detecting
sounds that transmits to the parent unit. The VOX sensitivity level is preset to HIGHEST.
If you have turned on sound alert, the parent unit beeps when the baby unit detect sounds.
VOX
Sensitivity
level
Highest High Medium Low Lowest
Description (Default setting)
The parent
unit speaker is
constantly on,
and you will
hear all sounds
(including
background
noises) from
your baby’s
room.
The parent
unit speaker
turns on for
soft babbling
and louder
sounds from
your baby. It
remains quiet
when your
baby sleeps
soundly.
The parent
unit speaker
only turns
on for loud
babbling
and louder
sounds from
your baby. It
remains quiet
when your
baby makes
soft sounds.
The parent
unit speaker
only turns
on for crying
and louder
sounds from
your baby. It
remains quiet
when your
baby makes
soft sounds.
The parent
unit speaker
only turns
on for loud
crying or
screeching
sounds from
your baby. It
remains quiet
when your
baby makes
soft sounds.
1. Press when the parent unit is not in use.
2. Press or to scroll to SENSITIVITY, then press .
3. Press or to choose the VOX sensitivity level.
4. Press to confirm your selection. The screen displays SAVED and you hear a
confirmation tone.
Note
To enter the VOX Level menu of the parent unit, the baby unit must be turned on.
Sound alert
If you turn on the sound alert, the parent unit beeps when the baby unit detects sounds
which had triggered the red light of visual sound indicator on the parent unit.
When the sound alert of the parent unit is turned on, is shown on LCD display. The
sound alert is preset to OFF.
1. Press when the parent unit is not in use.
2. Press or to choose SOUND ALERT, then press . The screen displays ON? or
OFF?.
3. Press to confirm your selection. The screen displays SAVED and you hear a
confirmation tone.
Sound sensitivity and sound alert
Status icons
Connection status
displays when strong signal
strength is detected between the
baby unit and the parent unit.
displays when moderate signal
strength is detected between the
baby unit and the parent unit.
displays when the weak signal
strength is detected between the
baby unit and the parent unit.
flashes when the link between the
baby unit and the parent unit is lost.
ECO mode
Displays when ECO mode is activated.
Glow-on-ceiling starry projector light
Displays when the projector light of
the baby unit is on.
Sound alert
Displays when the sound alert of the
parent unit is turned on.
Flashes when there are loud sounds
detected from the baby unit.
Vibration alert
Displays when the vibration alert of the
parent unit is turned on.
Flashes when there are loud sounds
detected from the baby unit.
Mute
Displays when the patient unit speaker
volume is turned off.
Battery status
animates when the
battery is charging.
displays solid when the battery is
fully charged.
flashes when the battery is charged
with AC adaptor, or charging is failed.
flashes when the battery is in low
level and needs charging.
No battery icon displays when there is
no battery installed.
operations
operations (Cont’d)
Vibration alert
You can turn on the vibration alert so that the parent unit vibrates when the baby unit
detects sounds which had triggered the red light of visual sound indicator on the parent
unit.
When the vibration alert of the parent unit is turned on, is shown on LCD display. The
vibration alert is preset to OFF.
1. Press when the parent unit is not in use.
2. Press or to choose VIBE ALERT, then press . The screen displays ON? or
OFF?.
3. Press to confirm your selection. The screen displays SAVED and you hear a
confirmation tone.
Note
Each time you set the vibration alert to ON, the parent unit vibrates briefly after you press SELECT.
Adjust the speaker volume for baby unit
You can adjust the baby unit’s speaker volume from VOLUME 1 to VOLUME 5, using the
parent unit.
To adjust the baby unit’s speaker volume using the parent unit:
1. Press when the parent unit is not in use.
2. Press or to choose BABY VOLUME, then press .
3. Press or to choose your desired volume level, then press . The screen
displays SAVED and you hear a confirmation tone.
Night light
The baby monitor has the night light for you to sooth and comfort your baby at night.
You can turn on or off the night light on the baby unit using the parent unit. You can also
turn on or off the night light with the baby unit manually.
To turn on or off the night light using the parent unit:
1. Press when the parent unit is not in use.
2. Press again to choose NIGHT LIGHT. The screen displays ON? or OFF?.
3. Press to confirm your selection. The screen displays SAVED and you hear a
confirmation tone.
Lullaby
The baby monitor has five lullabies for you to comfort your baby. You can play or stop
lullabies on the baby unit by controlling remotely with the parent unit.
1. Press when the parent unit is not in use.
2. Press or to choose LULLABY, then press .
3. Press or to choose a lullaby, or choose PLAY ALL, then press . The screen
displays PLAY or STOP.
4. Press to confirm your selection. The screen displays SAVED and you hear a
confirmation tone.
Notes
If you choose a lullaby, the selected lullaby will be played repeatedly for about 20 minutes.
If PLAY ALL is selected, the five lullabies will be played one after the other, until all of them are
played.
When the lullaby is playing, the parent unit displays the name of the selected lullaby, or PLAY ALL on
the idle screen.
Temperature
Your baby unit monitors the temperature of your baby’s room with its built-in
temperature sensor. If the detected temperature is out of the preset temperature range,
the parent unit will display an alert message.
Set temperature format:
You can choose to display the temperature in Fahrenheit (oF) or Celsius (oC).
1. Press when the parent unit is not in use.
2. Press or to scroll to TEMPERATURE, then press .
3. Press or to choose FORMAT, then press . The screen displays FAHRENHEIT?
or CELSIUS?.
4. Press to confirm your selection, The screen displays SAVED and you hear a
confirmation tone.
Set temperature range:
You can set the desired room temperature alert range. The minimum temperature can be
set between 52 oF (10oC) and 69 oF (20 oC). The maximum temperature can be set between
70 oF (21 oC) and 86 oF (30 oC).
To set minimum temperature
1. Press when the parent unit is not in use.
2. Press or to scroll to TEMPERATURE, then press .
3. Press or to choose MINIMUM, then press .
4. Press or to choose the desired minimum temperature.
5. Press to confirm your selection, The screen displays SAVED. You hear a
confirmation tone.
To set maximum temperature
1. Press when the parent unit is not in use.
2. Press or to scroll to TEMPERATURE, then press .
3. Press or to choose MAXIMUM, then press .
4. Press or to choose the desired maximum temperature.
5. Press to confirm your selection, The screen displays SAVED. You hear a
confirmation tone.
Set temperature alert tone
You can turn on the temperature alert tone so that the parent unit will emit an alert tone if
the detected temperature is out of range.
1. Press when the parent unit is not in use.
2. Press or to scroll to TEMPERATURE, then press .
3. Press or to choose ALERT ON/OFF, then press . The screen displays ON? or
OFF?.
4. Press to confirm your selection, The screen displays SAVED. You hear a
confirmation tone.
Set default
Use this feature to restore to the default settings. Restoring the default settings on one
parent unit will also reset the shared settings for VOX sensitivity level of the other parent
unit.
1. Press when the parent unit is not in use.
2. Press or to choose RESET, then press . The screen displays CONFIRM?.
3. Press to confirm. The screen displays SAVED. You hear a confirmation tone.
-OR-
Press to exit the menu. The current setting remains unchanged.
Customer service and product warranty
The crossed-out wheelie bin symbols on products and batteries, or on their respective packaging,
indicates they must not be disposed of in domestic waste as they contain substances that can be
damaging to the environment and human health.
The chemical symbols Hg, Cd or Pb, where marked, indicate that the battery contains more
than the specified value of mercury (Hg), cadmium (Cd) or lead (Pn) set out in Battery Directive
(2006/66/EC).
The solid bar indicates that the product was placed on the market after 13th August, 2005.
Help protect the environment by disposing of your product or batteries responsibly.
Disposal of batteries and product
IMPORTANT
Please retain this booklet with your sales receipt as proof of the date of purchase.
Customer Service
Please call our Consumer Services Department on 03306 780149 (from UK) or
+44 3306 780149 (outside UK) and a service representative will be happy to help you.
Declaration of Conformity
This product is intended for use within Europe and UK.
This equipment complies with the essential requirements to EU’s Radio Equipment Directive
(2014/53/EU) and the UK’s Radio Regulations 2017 on radio systems and telecommunication
equipment.
VTech Telecommunications Ltd. hereby declares that this Audio Baby Monitor DM1212 is
in compliance with the essential requirements and other relevant provisions of EU’s Radio
Equipment Directive (2014/53/EU) and UK’s Radio Equipment Regulations 2017.
The Declaration of Conformity for the DM1212 is available from
http://www.vtech.com/rtte-directive.
To keep this product working well and looking good, follow these guidelines:
Avoid placing it near heating appliances and devices that generate electrical noise (for example, motors or
fluorescent lamps).
DO NOT expose it to direct sunlight or moisture.
Avoid dropping the product or treating it roughly.
Clean with a soft damp cloth.
DO NOT immerse the parent unit and the baby unit in water and do not clean them under running water.
DO NOT use cleaning spray or liquid cleaners.
Make sure the baby unit and parent unit are dry before you connect them to the mains again.
General product care
When you are not going to use the baby monitor for some time, store the parent unit, the baby unit and the
adaptors in a cool and dry place.
Storage
Adult supervision
This audio baby monitor should be for use by adults only.
Do not place the baby unit inside the cot or playpen.
To ensure your children’s safety, do not allow them to touch or play with the baby monitor and its
accessories. THIS IS NOT A TOY.
Credits:
The Background Noise sound file was created by Caroline Ford, and is used under the Creative Commons license.
The Stream Noise sound file was created by Caroline Ford, and is used under the Creative Commons license.
The Crickets At Night sound file was created by Mike Koenig, and is used under the Creative Commons license.
The Heart Beat sound file was created by Zarabadeu, and is used under the Creative Commons license.
This warranty is valid for the UK and Ireland only. For products purchased outside
the UK and Ireland, please contact your local distributor or place of purchase.
P
R
O
D
U
C
T
W
A
R
R
A
N
T
Y
ONE
YEAR
PRODUCT WARRANTY
Thank you for choosing this quality product from VTech.
1.The product detailed above is covered by a one year warranty from the date of purchase,
against any defects in materials or workmanship.
2.The product may be returned to the place of purchase. Alternatively the product can be
returned to VTech Electronics Europe Plc (see address below), with proof of purchase,
without proof of purchase no replacement will be provided.
3.VTech Electronics Europe Plc will examine the product and if it is found to be defective
due to faulty materials or workmanship, will replace the product at their discretion.
4.If the product covered by this warranty is damaged due to misuse, modification or
unauthorized repair, or because of faulty batteries, battery discharge or incorrect
electrical connections, then this warranty becomes void.
5.This warranty is personal to the original purchaser and is not transferable.
6.Breakages to the LCD screen are not covered by the warranty.
7.Products returned to VTech Electronics Europe Plc, should be sent to the address shown
below and packed carefully to avoid damage in transit. Please do not include batteries or
adaptors. Please include details of the fault together with your name and address,
contact phone number and/or email address.
8.To keep an online record of your warranty, please register your product online at
www.vtech.co.uk/clubvtech
VTech Electronics Europe Plc, c/o XPO Logistics, Warehouse 350, Cat & Fiddle Lane,
West Hallam, DE7 6HE
THIS WARRANTY IS OFFERED AS AN EXTRA BENEFIT AND DOES NOT AFFECT
CONSUMERS’ STATUTORY RIGHTS.
UK
PRODUCT REGISTRATION
Visit www.vtech.co.uk/clubvtech/login
to register your VTech product
By joining the VTech Club you can also enter competitions,
find out about news and events, seek expert advice for parents
and let your kids play fun learning games and activities.
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für VTech DM1212 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von VTech DM1212

VTech DM1212 Bedienungsanleitung - Deutsch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info