809794

VTech RM7767HD Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
mount the baby unit (optional)
Download app for mobile access
Test the sound level and position the HD video monitor
Basic operation
To ensure that your HD video monitor is always at its best performance, the Parent Unit
will prompt a message and ask you to update its software and the Baby Unit’s firmware
when there are new versions available. Select “Now” to reboot the system, or switch off
and on the Parent Unit later to reboot the system into the latest software.
• To check if your device is running on the latest software, or to update your device
software, go to:
> Software Update.
Connect your HD video monitor with home Wi-Fi network
• You must connect your video monitor to your secured home Wi-Fi network in order
to receive the latest software and firmware updates. To set the Wi-Fi up, go to:
> Congure Wi-Fi.
Note
• Make sure the Baby Unit is on when you set up the Wi-Fi network.
Auto software and rmware update
If you plan to install your baby unit in a designated
location, and use your home Wi-Fi network to
connect your video monitor, you need to test
which of your selected monitoring areas within the
house have good Wi-Fi signal strength. After you
have powered on your parent unit, you can use
your parent unit’s Wi-Fi signal strength indicator
to assist in checking. Once you have identified the
suitable location, you can install your baby unit.
Adjust the distance between your baby unit and
the Wi-Fi router if needed.
Tip
• Depending on surroundings and obstructing
factors that affect signal strength, such as distance
and internal walls, you may experience reduced
Wi-Fi signal. To improve the Wi-Fi signal strength,
adjust the distance or direction of your parent unit.
Check with your parent unit again.
test the location for the baby unit
Talk to your baby via the baby unit
1. Press and hold the TALK key.
2. When the icon displays on
screen, speak to your parent
unit. Your voice is transmitted to
the baby unit.
3. When finished talking, release
the TALK key and hear your
baby again.
Zoom
Press to zoom in or out.
Adjust speaker volume
Press -VOL / VOL+ to adjust your parent unit
speaker volume level received from the baby
unit.
After powering up your video monitor, the parent unit streams live video in direct mode.
We recommend you follow the instructions on-screen to set up home Wi-Fi network
with your monitor for functionality enhancements and mobile access. See Auto software
and rmware update and Download app for mobile access in this quick start guide.
Use the menu
Press MENU on the parent unit to enter the
main menu, choose a menu item, or save a
setting. You can use the parent unit menu for
advanced settings or operations, such as to
play or stop a lullaby, or adjust the motion
and sound detection settings.
While in the menu:
• Press , , or to scroll among the
menu options.
• Press SELECT to select an item.
• Press TALK / to return to the live video.
• Press to go to the Help & info page.
Testing the sound level of the HD video monitor
Note
• This baby monitor should be for use by adults only.
• It is not a substitute for proper adult supervision, and should not be used as such.
Caution
• For hearing protection, make sure the parent unit is more than 1 metre away from the baby
unit. If you hear feedback from the parent unit, move the parent unit further away until the
noise stops. You can also press - VOL on the parent unit to lower or mute the noise.
Tip
• Increase the parent unit speaker volume if you cannot hear the sounds transmitted from the baby unit.
Positioning the HD video monitor
Caution
• Keep the baby unit out of the reach of your baby.
Never place or mount the baby unit inside the baby’s cot
or playpen.
1. Place the baby unit more than 1 metre away
from your baby.
2. Adjust the angle of the baby unit to aim at your baby.
3. To avoid causing feedback noise from your HD video monitor:
• Make sure your baby unit and parent unit are more than 1 metre apart; OR
• Turn down the volume of your parent unit.
1. Place the wall mount bracket on a
wall and then use a pencil to mark
two holes in parallel. Remove the
wall mount bracket and drill two
holes in the wall (5.5mm drill bit).
NOTESNOTE
Notes
• Check for reception strength and baby
unit angle before drilling the holes.
• The types of screws and wall plugs you
need depend on the composition of
the wall. You may need to purchase
the screws and wall plugs separately to
mount your baby units.
2. If you drill the holes into a stud, go
to step 3.
• If you drill the holes into an
object other than a stud, insert
the wall plugs into the holes.
Tap gently on the ends with a
hammer until the wall plugs are
flush with the wall.
3. Align the wall mount bracket and screws with
the holes in the wall as shown. Tighten the screw
in the middle hole first, so that the wall mount
bracket position is fixed. You can tighten the
other screw in the top hole.
3. Insert the screws into the holes and
tighten the screws until only 6mm of the
screws are exposed.
4. Place the baby unit on the wall
mount bracket, and then slide it
forward until it locks into place. Align
the holes on the wall mount bracket
with the screws on the wall, and slide
the wall mount bracket down until it
locks into place.
5. You can maximise your baby unit’s viewing angles by tilting the wall mount bracket.
Hold the baby unit, and then rotate the knob in an anticlockwise direction. This will loosen the joint of the wall mount bracket.
Tilt your baby unit up or down to adjust to your preferred angle. Then, rotate the knob in a clockwise direction to tighten the
joint and secure the angle.
OR
4. Place the baby unit on the wall mount bracket,
and then slide it forward until it locks into place.
Connect the power adaptor to the baby unit
and a power supply.
2
Install MyVTech Baby Pro mobile app
1. Browse the App Store or the Google Play store .
2. Search for the mobile app with the keyword “MyVTech Baby Pro“.
3. Download and install the MyVTech Baby Pro mobile app to your mobile device.
OR
Scan the QR code on the right to get the app.
Note
• Make sure your mobile device meets the
minimum requirement for the mobile app.
Minimum requirement
The mobile app is compatible with:
• AndroidTM 6.0 or later; and
• iOS 11.0 or later.
You can download the free MyVTech Baby Pro mobile app and install it
to a mobile device, then use your mobile device and the mobile app to
monitor your areas remotely.
1. Press MENU when the parent unit is idle.
2. Go to > Connect Mobile Phone.
3. Scan the QR code in the parent unit to download the app into your
mobile device.
4. Follow the instructions in the mobile app to set up and pair your baby
unit to the mobile app.
1
After installing the mobile app, follow the instructions in the mobile app and parent
unit to set up and pair your baby unit.
In your mobile device:
1. Tap to run the mobile app in your mobile device, and then create a user account.
2. We recommend that you use common webmail services, such as Google Gmail, for the
registration of your user account. Check your email (and Spam folder), and activate your
new user account via the email link. Then, sign in to your account.
3. Follow the instructions in the mobile app to pair the camera. Tap , then Add Camera
in the mobile app to get started.
2
To keep this product working well and looking good, follow these guidelines:
• Avoid placing it near heating appliances and devices that generate electrical noise (for example,
motors or fluorescent lamps).
• DO NOT expose it to direct sunlight or moisture.
• Avoid dropping the product or treating it roughly.
• Clean with a soft damp cloth.
• DO NOT immerse the parent unit and the baby unit in water and do not clean them under running water.
• DO NOT use cleaning spray or liquid cleaners.
• Make sure the parent unit and the baby unit are dry before you connect them to the mains again.
• Clean the USB charging port of dust, dirt, and lint regularly.
General product care
Specifications are subject to change without notice.
© 2022 VTech Telecommunications Ltd.
All rights reserved. 12/22. RM7767HD_UK_QSG_V5_newSW
Technical specications
Frequency control Crystal controlled PLL synthesizer
Transmit frequency Baby unit: 2412 - 2472 MHz
Parent unit: 2412 - 2472 MHz
Maximum power used by the transmitter: 0.1W (100mW)
Channels 13
LCD 7” Colour LCD (IPS 1280x800 pixels)
Nominal effective
range
Actual operating range may vary according to environmental
conditions at the time of use.
Power requirements Parent unit: 3.7V 2700mAh 9.99Wh Li-ion battery
Baby unit power adaptor: Output: 5V DC @ 1.5A
Parent unit power adaptor: Output: 5V DC @ 1A
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and batteries, or on their respective
packaging, indicates they must not be disposed of in domestic waste as they contain
substances that can be damaging to the environment and human health.
The chemical symbols Hg, Cd or Pb, where marked, indicate that the battery contains
more than the specified value of mercury (Hg), cadmium (Cd) or lead (Pn) set out in
Battery Directive (2006/66/EC).
The solid bar indicates that the product was placed on the market after 13th August, 2005.
Help protect the environment by disposing of your product or batteries responsibly.
Credits:
The Background Noise sound file was created by Caroline Ford, and is used under the Creative Commons license.
The Stream Noise sound file was created by Caroline Ford, and is used under the Creative Commons license.
The Crickets At Night sound file was created by Mike Koenig, and is used under the Creative Commons license.
The Heart Beat sound file was created by Zarabadeu, and is used under the Creative Commons license.
Customer service and product warranty
Android TM and Google Play TM are trademarks of Google Inc.
App Store is a trademark of Apple Inc., registered in the U.S. and other countries.
iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
This warranty is valid for the UK and Ireland only. For products purchased outside
the UK and Ireland, please contact your local distributor or place of purchase.
P
R
O
D
U
C
T
W
A
R
R
A
N
T
Y
ONE
YEAR
PRODUCT WARRANTY
Thank you for choosing this quality product from VTech.
1.The product detailed above is covered by a one year warranty from the date of purchase,
against any defects in materials or workmanship.
2.The product may be returned to the place of purchase. Alternatively the product can be
returned to VTech Electronics Europe Plc (see address below), with proof of purchase,
without proof of purchase no replacement will be provided.
3.VTech Electronics Europe Plc will examine the product and if it is found to be defective
due to faulty materials or workmanship, will replace the product at their discretion.
4.If the product covered by this warranty is damaged due to misuse, modification or
unauthorized repair, or because of faulty batteries, battery discharge or incorrect
electrical connections, then this warranty becomes void.
5.This warranty is personal to the original purchaser and is not transferable.
6.Breakages to the LCD screen are not covered by the warranty.
7.Products returned to VTech Electronics Europe Plc, should be sent to the address shown
below and packed carefully to avoid damage in transit. Please do not include batteries or
adaptors. Please include details of the fault together with your name and address,
contact phone number and/or email address.
8.To keep an online record of your warranty, please register your product online at
www.vtech.co.uk/clubvtech
VTech Electronics Europe Plc, c/o XPO Logistics, Warehouse 350, Cat & Fiddle Lane,
West Hallam, DE7 6HE
THIS WARRANTY IS OFFERED AS AN EXTRA BENEFIT AND DOES NOT AFFECT
CONSUMERS’ STATUTORY RIGHTS.
UK
PRODUCT REGISTRATION
Visit www.vtech.co.uk/clubvtech/login
to register your VTech product
By joining the VTech Club you can also enter competitions,
find out about news and events, seek expert advice for parents
and let your kids play fun learning games and activities.
Manufacturer: VTech Telecommunications Ltd.
23/F., Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong.
Importer: VTech Electronics Europe Plc.
Napier Court, Abingdon Science Park, Abingdon, Oxon, OX14 3YT.
IMPORTANT
Please retain this booklet with
your sales receipt as proof of the
date of purchase.
Customer Service
Please visit www.vtechphones.eu
to contact our Customer Service
Department.
Declaration of Conformity
This product is intended for use within Europe and UK.
This equipment complies with the essential requirements to EU’s Radio Equipment Directive
(2014/53/EU) and the UK’s Radio Regulations 2017 on radio systems and telecommunication
equipment.
VTech Telecommunications Ltd. hereby declares that this 7” Smart Wi-Fi 1080p Pan & Tilt Monitor
RM7767HD is in compliance with the essential requirements and other relevant provisions of EU’s
Radio Equipment Directive (2014/53/EU) and UK’s Radio Equipment Regulations 2017.
The Declaration of Conformity for the RM7767HD is available from
www.vtechphones.eu.
Need help?
Use your smartphone or mobile device to access our online help.
1. Go to https://www.vtechphones.eu/en-uk/technical-
support; OR
Scan the QR code on the right. Launch the camera app or
QR code scanner app on your smartphone or tablet. Hold
the device’s camera up to the QR code and frame it. Tap
the pop-up notification to be redirected to the online help page.
- If the QR code is not displaying clearly, adjust your
camera’s focus by moving your device closer or
further away until the image is clear.
2. Search for the model - RM7767HD.
If you would like to contact us, visit
www.vtechphones.eu/en-uk/support/contact-us or
scan the QR code.
S
m
Driven by system updates, the software, online help topics, and online
FAQs will be updated periodically.
For operations and guides to help you make use of your HD video
monitor, and for the latest information and support, check out our
online help topics and FAQs.
Product Support
Contact Us
Adjust baby unit speaker volume
1. Press MENU.
2. Go to Baby unit settings .
3. Press to scroll to Volume .
4. Press to decrease and to increase the baby unit’s
speaker volume.
> 1 metre> 1 metre
Muted
Press and hold
Turn on/off the parent unit screen
Turn on or off the parent unit screen without
powering off the parent unit. You will still
hear sounds from the baby unit.
• Press POWER on the parent unit to turn
off the screen.
• Press any key on the parent unit to turn
the screen on again.
> 3m
37
37
10:25 AM
10:25 AM
> 1 metre> 1 metre
< 3ft (1m)
> 3ft (1m)
> 1 metre> 1 metre
< 1 metre< 1 metre
Alternatively, you can download the app from the Apple App Store or Google Play store.
Adjust the night light on the baby unit
1. Tap the Night light control key on the top
of the Baby Unit to turn on/off the night light.
2. Tap and hold the Night light control key
to adjust the night light’s brightness level.
Brightness changes one level at a time.
1
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für VTech RM7767HD wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von VTech RM7767HD

VTech RM7767HD Installationsanweisung - Englisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info