809763

VTech VM5463 Anleitung

1
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
1
2
14
4
5
6
7
8
3
10
11
12
13
9
1
2
14
4
5
6
7
8
3
10
11
12
13
9
NOTESNOTE
• The rechargeable battery in the parent unit is built-in.
• Use only the power adapters supplied with this product.
• Make sure the baby monitor is not connected to a switch-controlled electric outlet.
• Connect the power adapters in a vertical or floor mount position only. The adapters’ prongs are not
designed to hold the weight of baby monitor, so do not connect them to any ceiling, under-the-table,
or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets.
• Make sure the parent unit, the baby units and the power adapter cords are out of reach of children.
Press and hold
Specifications are subject to change without notice.
© 2021 VTech Communications, Inc. All rights reserved.
11/21. VM5463_UK_QSG_V5.
Quick start guide
VM5463
Full Colour Pan and Tilt
Video Monitor
1 Connect the baby monitor
2
Power on or off the baby monitor
Slide the switch to power on or off your baby unit.
Press and hold POWER to power on or off your parent unit.
What’s in the box
4
Status check
Once you power on both your
baby unit and parent unit, your
parent unit displays image from
the baby unit, and the LINK LED
light turns on.
The ON LED light of baby unit
turns on.
3 Positioning the baby monitor
Caution
• The default volume of your parent unit is
level 4, and the maximum volume is level 7.
If you experience feedback from your baby
monitor while positioning:
- Make sure your baby unit and parent unit
are more than 3 feet (1 metre) apart, OR
- Lower the volume of your parent unit.
NOTESNOTE
Note
• To avoid interference from other electronic
devices, place your baby monitor at least 3 feet
(1 metre) away from devices such as wireless
routers, microwaves, cell phones and computers.
Quick start guide
Adjust speaker volume
Press / to adjust your parent unit
speaker volume.
Zoom
Press to zoom in or out.
Talk to your baby unit
Press and hold TALK and speak to your
parent unit. Your voice is transmitted to
the baby unit. Release TALK when finish
talking and hear your baby again.
Use the menu
Press to enter the menu, choose a menu item,
or save a setting. You can use the parent unit for
advanced settings or operations, such as to play
or stop the baby unit lullaby, or to adjust the baby
unit sound sensitivity.
While in the menu:
• Press or to scroll among the menu options.
• Press to select an item, or to save a setting.
• Press or to scroll among the sub-menus,
or to adjust a setting.
• Press to return to the previous menu options
without changing the current setting.
• Press /EXIT to return to live video.
Basic operation - Parent unit
Turn off the screen
Press and hold LCD ON/OFF to switch off
the screen. You can still hear sound from the
baby unit.
Tip
• Press any keys on the parent unit to turn on
the screen again.
Overview - Parent unit
Overview - Baby unit
Frequency control Crystal controlled PLL synthesizer
Transmit frequency Baby unit: 2405 - 2475 MHz
Parent unit: 2405 - 2475 MHz
Maximum power used by the transmitter: 0.10W (100mW)
Channels 32
LCD 5” Colour LCD
(WQVGA 480x272 pixel)
Nominal effective range Actual operating range may vary according to environmental
conditions at the time of use.
Power requirements Parent unit: 3.8V 2100mAh, Li-ion battery
Baby unit power adapter: Output: 5V DC @ 1A
Parent unit power adapter: Output: 5V DC @ 1A
Technical specifications
Credits:
The Background Noise sound file was created by Caroline Ford, and is used under the Creative Commons license.
The Stream Noise sound file was created by Caroline Ford, and is used under the Creative Commons license.
The Crickets At Night sound file was created by Mike Koenig, and is used under the Creative Commons license.
The Heart Beat sound file was created by Zarabadeu, and is used under the Creative Commons license.
Important safety instructions
Power on
Power off>
< 3ft (1m)
3ft (1m)
> 1 metre
ē
Press and hold
Long press
5
3
4
2
1
6
5
7
8
9
10
11
13
3
4
2
1
6
12
5
7
8
9
10
11
13
3
4
2
1
6
12
1LED lights
2LCD display
3Microphone
4POWER
5TALK
6MENU/SELECT
7Arrow keys
8 Volume
9VIEW /LCD ON/OFF
10 /EXIT
11 Antenna
12 RESET
13 Stand
14 Power jack
1Light sensor
2Camera lens
3Microphone
4Night light
5On/Off switch
6On/Off LED light
• On when the baby unit is
turned on and is paired to the
parent unit.
• Flashes when the baby unit is
not being viewed;
or when the link to the parent
unit is lost.
7Light projection
8Speaker
9 Projection light on/off key
10 Night light on/off key
11 Power jack
12 PAIR key
13 Slots for wall mounting
x 2 x 2
≥
< 3ft (1m)
3ft (1m)
﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏
﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏
Press and hold
Parent unit icons
Main
menu Sub-menu
Brightness
• Adjust the parent unit’s LCD
brightness.
Camera settings
Baby unit speaker volume
• Adjust the baby unit’s
speaker volume.
Lullaby
/ Play/Stop lullaby
• Select one of the soothing sounds,
or white noise.
• Select one of the five melodies.
• Play all melodies.
• Set timer to stop playing the
selected melody or soothing sound.
Night light
/ Turn on/off night light
4
5
6
• Select one of the night light colours.
• Change to all seven colors in cycles.
Main
menu Sub-menu
• Set timer to turn the night light off.
• Set to auto turn on the night light
when baby unit detects sound. It will
turn off after 15 minutes of no sound
detection. Set VOX sensitivity level to
detect sounds that only exceed certain
levels. See Sound sensitivity and
sound activation section for more.
A /
• Turn on/off the adaptive night light
feature. When on, baby unit detects
ambient light. If the room is bright,
the night light adjusts itself to be
brighter; if the room is dim, the night
light adjusts itself to be less bright.
Projection light
/ Turn on/off projection light
• Set timer to turn the projection light off.
• Set to auto turn on the projection light
when baby unit detects sound. It will
turn off after 15 minutes of no sound
detection. Set VOX sensitivity level to
only detect sounds that exceed certain
levels. See Sound sensitivity and
sound activation section for more.
Alert tones
• Set the parent unit to beep
when the battery is low.
• Set the parent unit to beep
when the link between the
parent unit and the baby unit
is lost.
• Set the confirmation tone
on or off when selecting an
option in the menus.
Main
menu Sub-menu
Temperature
/
• Turn on/off temperature alert tone.
• Set the parent unit to beeps
whenever the room temperature
detected by the baby unit falls
outside of the set temperature range.
• Set the minimum temperature.
• Set the maximum temperature.
• Set temperature display in
Fahrenheit (oF) or Celsius (oC)
Sound activation - screen and audio
/ Turn on/off sound activation
• Set sound activation on or off.
• When it is on, and the baby unit
detects no sound, the parent unit
screen stays off to save power. Once
a sound is detected, the parent
unit screen and speaker turns on
automatically, and you can see and
hear your baby. The parent unit will
then turn off again after 50 seconds
of no sound detection.
NOTESNOTE
Note
• When the parent unit screen is off
and it receives alerts, for example,
link lost between parent unit and
baby unit, or battery is low, the
parent unit screen and speaker will
turn on for 10 seconds.
VOX (Voice Activated Alert) Sensitivity
• You can set VOX sensitivity level
to activate parent unit screen and
sound when baby unit detects
sounds that exceed certain levels.
See Sound sensitivity and sound
activation section.
Main menu icons
The applied nameplate is located at the bottom of the baby
unit’s base.
When using your equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock
and injury, including the following:
1. Follow all warnings and instructions marked on the
product.
2. Adult setup is required.
3. CAUTION: Do not install the baby unit at a height above
2 metres.
4. This product is intended as an aid. This product is not a
substitute for adult supervision of the infant. Supervising the
infant is the responsibility of the parent or carer.
5. This product is not intended for use as a medical monitor.
6. Do not use this product near water, for example, near to
a bath, sink, swimming pool or shower.
7. CAUTION: Use only the battery provided. There may be a risk
of explosion if a wrong type of battery is used for the parent
unit. The battery cannot be subjected to high or low extreme
temperature and low air pressure at high altitude during use,
storage or transportation. Disposal of battery into fire or a hot
oven, or mechanically crushing or cutting or the battery can
result in an explosion. Leaving the battery in an extremely
high temperature surrounding environment can result in an
explosion or the leakage of flammable liquid of gas. Battery
subjected to extremely low air pressure may result in an
explosion or the leakage of flammable liquid or gas. Dispose of
used battery according to the instructions.
8. Use only the adaptors included with this product.
Incorrect adaptor polarity or voltage can seriously
damage the product.
Power adaptor information:
Output: 5V DC 1A
Ten Pao Industrial Co.,Ltd.
Model: S005BNV0500100(EU); S005BNB0500100(UK).
-OR-
Vtech Telecommunications LTD
Model: VT05EEU05100 (EU); VT05EUK05100 (UK)
Rechargeable battery information:
Li-ion battery, 3.8V 2100mAh
Zhongshan Tianmao Battery Co., Ltd.
Model Number: BP1763
9. The power adaptors are intended to be correctly oriented
in a vertical or floor mount position. The prongs are not
designed to hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
10. For pluggable equipment, the socket-outlet should
be installed near the equipment and should be easily
accessible.
11. Unplug this product from the wall outlet before cleaning.
Do not use liquid or aerosol cleaners. Use a damp cloth for
cleaning.
12. Do not cut off the power adaptors to replace them with
other plugs, as this causes a hazardous situation.
13. Do not allow anything to rest on the power cords. Do not
install this product where the cords may be walked on or
crimped.
14. This product should be operated only from the type
of power source indicated on the marking label. If you
are not sure of the type of power supply in your home,
consult your dealer or local power company.
15. Do not overload wall outlets or use an extension cord.
16. Do not place this product on an unstable table, shelf, stand
or other unstable surfaces.
17. This product should not be placed in any area where
proper ventilation is not provided. Slots and openings
in the back or bottom of this product are provided for
ventilation. To protect them from overheating, these
openings must not be blocked by placing the product
on a soft surface such as a bed, sofa or rug. This product
should never be placed near or over a radiator or heat
source.
18. Never push objects of any kind into this product through
the slots because they may touch dangerous voltage
points or create a short circuit. Never spill liquid of any kind
on the product.
19. To reduce the risk of electric shock, do not disassemble
this product, but take it to an authorized service facility.
Opening or removing parts of the product other than
specified access doors may expose you to dangerous
voltages or other risks. Incorrect reassembling can
cause electric shock when the product is subsequently
used.
20. You should test the sound reception every time you turn
on the units or move one of the components.
21. Periodically examine all components for damage.
22. There is a very low risk of privacy loss when using certain
electronic devices, such as baby monitors, cordless
telephones, etc. To protect your privacy, make sure the
product has never been used before purchase, reset
the baby monitor periodically by powering off and then
powering on the units, and power off the baby monitor
if you will not use it for some time.
23. Children should be supervised to ensure that they do not
play with the product.
24. The product is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their
safety.
SAVE THESE INSTRUCTIONS
Cautions
1. Use and store the product at a temperature between 0oC
and 40oC.
2. Do not expose the product to extreme cold, heat or direct
sunlight. Do not put the product close to a heating source.
3. Batteries should not be exposed to excessive heat such as
bright sunshine or fire.
4. Warning—Strangulation Hazard—
Children have STRANGLED in cords. Keep this
cord out of the reach of children (more than 3
ft (0.9 m) away). Do not remove this tag.
5. Never place the baby unit(s) inside the baby’s
cot or playpen. Never cover the baby unit(s)
or parent unit with anything such as a towel or a blanket.
6. Other electronic products may cause interference with
your baby monitor. Try installing your baby monitor
as far away from these electronic devices as possible:
wireless routers, radios, cellular telephones, intercoms,
room monitors, televisions, personal computers,
kitchen appliances and cordless telephones.
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless devices):
Wireless Technology Research, LLC (WTR), an independent
research entity, led a multidisciplinary evaluation of the
interference between portable wireless devices and implanted
cardiac pacemakers. Supported by the U.S. Food and Drug
Administration, WTR recommends to physicians that:
Pacemaker patients
• Should keep wireless devices at least six inches from the
pacemaker.
• Should NOT place wireless devices directly over the
pacemaker, such as in a breast pocket, when it is turned ON.
WTR’s evaluation did not identify any risk to bystanders with
pacemakers from other persons using wireless devices.
Electromagnetic fields (EMF)
This VTech product complies with all standards regarding
electromagnetic fields (EMF). If handled properly and
according to the instructions in this user’s manual, the product
is safe to be used based on scientific evidence available today.
Caution
• Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the baby’s cot or playpen.
Power On Power Off
> 1 metre
< 1 metre
> 1 metre
> 1 metre
< 1 metre
7
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für VTech VM5463 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von VTech VM5463

VTech VM5463 Bedienungsanleitung - Deutsch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info