809764

VTech VM818HD Anleitung

1
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
NOTESNOTE
• The rechargeable battery in the parent unit is built-in.
• Use only the power adapters supplied with this product.
• Make sure the parent unit and the baby unit are not connected
to the switch controlled electrical outlets.
• Connect the power adapters in a vertical or floor mount position
only. The adapters’ prongs are not designed to hold the weight
of the parent unit and the baby unit, so do not connect them to
any ceiling, under-the-table, or cabinet outlets. Otherwise, the
adapters may not properly connect to the mains.
• Make sure the parent unit, the baby unit and the power adapter
cords are out of reach of children.
VM818HD
Full Color
HD Video Monitor
1 Connect the baby monitor
2
Power on or off the baby monitor
What’s in the box
4
Status check
Once you power on both your
baby unit and parent unit, your
parent unit displays image from
the baby unit, and the LED
light turns on.
The green LED light on the
baby unit also turns on.
3 Positioning the baby monitor
Caution
• The default volume of your parent unit is
level 3, and the maximum volume is level 5.
If you experience high-pitched screeching
noise from your baby monitor while
positioning:
- Make sure your baby unit and parent unit are
more than 1 metre apart, OR
- Lower the volume of your parent unit.
NOTESNOTE
Note
• To avoid interference from other electronic
devices, place your baby monitor at least 1 metre
away from devices such as wireless routers,
microwaves, cell phones and computers.
Use the menu
Press to enter the menu, choose a
menu item, or save a setting. You can use
the parent unit for advanced settings or
operations, such as to play or stop the baby
unit lullaby, or to adjust the baby unit sound
sensitivity.
While in the menu:
• Press , , or to scroll among the
menu options.
• Press to select an item, or to save a
setting.
• Press / to return to the live video.
• Press to go to the Help & info page.
Basic operation - Parent unit
Overview - Parent unit
Overview - Baby unit
The applied nameplate is located at the bottom of the baby
unit’s base.
When using your equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock and injury, including the following:
1. Follow all warnings and instructions marked on the
product.
2. Adult setup is required.
3. CAUTION: Do not install the baby unit at a height above
2 metres.
4. This product is intended as an aid. It is not a substitute for
responsible and proper adult supervision and should not
be used as such.
5. This product is not intended for use as a medical monitor .
6. Do not use this product near water. For example, do not
use it next to a bath tub, wash bowl, kitchen sink, laundry
tub or swimming pool, or in a wet basement or shower.
7. CAUTION: Use only the battery provided. There may be a risk
of explosion if a wrong type of battery is used for the parent
unit. The battery cannot be subjected to high or low extreme
temperature and low air pressure at high altitude during use,
storage or transportation. Disposal of battery into fire or a hot
oven, or mechanically crushing or cutting or the battery can
result in an explosion. Leaving the battery in an extremely
high temperature surrounding environment can result in an
explosion or the leakage of flammable liquid of gas. Battery
subjected to extremely low air pressure may result in an
explosion or the leakage of flammable liquid or gas. Dispose
of used battery according to the information in The RBRC seal.
8. Use only the adapters included with this product.
Incorrect adapter polarity or voltage can seriously
damage the product.
Power adapter information:
Parent unit output: 5V DC 1A
VTech Telecommunications Ltd.
Model: VT05EUK05100 (UK)
Baby unit output: 5V DC 1A.
VTech Telecommunications Ltd.
Model: VT05EUK05100 (UK)
Rechargeable battery information:
Li-ion battery 3.8V, 2100mAh , 7.98Wh;
Zhongshan Tianmao Battery Co., Ltd.
Model Number: BP1763
9. The power adapters are intended to be correctly
oriented in a vertical or floor mount position. The prongs
are not designed to hold the plug in place if it is plugged
into a ceiling, under-the-table or cabinet outlet.
10. For pluggable equipment, the socket-outlet shall
be installed near the equipment and shall be easily
accessible.
11. Unplug this product from the wall outlet before cleaning.
Do not use liquid or aerosol cleaners. Use a damp cloth for
cleaning.
12. Do not cut off the power adapters to replace them with
other plugs, as this causes a hazardous situation.
13. Do not allow anything to rest on the power cords. Do not
install this product where the cords may be walked on or
crimped.
14. This product should be operated only from the type
of power source indicated on the marking label. If you
are not sure of the type of power supply in your home,
consult your dealer or local power company.
15. Do not overload wall outlets or use an extension cord.
16. Do not place this product on an unstable table, shelf, stand
or other unstable surfaces.
17. This product should not be placed in any area where
proper ventilation is not provided. Slots and openings
in the back or bottom of this product are provided for
ventilation. To protect them from overheating, these
openings must not be blocked by placing the product
on a soft surface such as a bed, sofa or rug. This product
should never be placed near or over a radiator or heat
register.
18. Never push objects of any kind into this product through
the slots because they may touch dangerous voltage
points or create a short circuit.
Never spill liquid of any kind on the product.
19. To reduce the risk of electric shock, do not
disassemble this product, but take it to an authorized
service facility. Opening or removing parts of the
product other than specified access doors may
expose you to dangerous voltages or other risks.
Incorrect reassembling can cause electric shock when
the product is subsequently used.
20. You should test the sound reception every time you turn
on the units or move one of the components.
21. Periodically examine all components for damage.
22. There is a very low risk of privacy loss when using
certain electronic devices, such as baby monitors,
cordless telephones, etc. To protect your privacy, make
sure the product has never been used before purchase,
reset the baby monitor periodically by powering off
and then powering on the units, and power off the
baby monitor if you will not use it for some time.
23. Children should be supervised to ensure that they do not
play with the product.
24. The product is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
SAVE THESE INSTRUCTIONS
Cautions
1. Use and store the product at a temperature between 0oC
and 40oC.
2. Do not expose the product to extreme cold, heat or
direct sunlight. Do not put the product close to a heating
source.
3. Batteries should not be exposed to excessive heat such
as bright sunshine or fire.
4. Warning—Strangulation Hazard—
Children have STRANGLED in cords. Keep
this cord out of the reach of children
(more than 0.9m (3 feet away). Do not
remove this tag.
5. Never place the baby unit(s) inside the
baby’s cot or playpen. Never cover the baby unit(s) or
parent unit with anything such as a towel or a blanket.
6. Other electronic products may cause interference
with your baby monitor. Try installing your baby
monitor as far away from these electronic devices
as possible: wireless routers, radios, cellular
telephones, intercoms, room monitors, televisions,
personal computers, kitchen appliances and cordless
telephones.
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless devices):
Wireless Technology Research, LLC (WTR), an independent
research entity, led a multidisciplinary evaluation of the
interference between portable wireless devices and
implanted cardiac pacemakers. Supported by the U.S. Food
and Drug Administration, WTR recommends to physicians
that:
Pacemaker patients
• Should keep wireless devices at least six inches from the
pacemaker.
• Should NOT place wireless devices directly over the
pacemaker, such as in a breast pocket, when it is turned
ON.
WTR’s evaluation did not identify any risk to bystanders with
pacemakers from other persons using wireless devices.
Electromagnetic fields (EMF)
This VTech product complies with all standards regarding
electromagnetic fields (EMF). If handled properly and
according to the instructions in this user’s manual, the product
is safe to be used based on scientific evidence available
today.
Important safety instructions
1 Link LED light
2 Battery LED light
33- level sound indicator
light
4 Talk / Exit
• Press and hold to talk to
the baby unit.
• While in a submenu,
press to exit.
5 Zoom
• Press to zoom in/out.
• When in the main menu,
press to go to the
Help & Info page.
6Arrow keys
7 Menu/Select
• Press to enter the main
menu.
• While in a menu, press to
choose an item, or save a
setting.
8 /
• Increase or decrease
parent unit’s volume.
9Microphone
10 Speaker
11 POWER / LCD OFF
12 Power jack
13 RESET
Force reboot the parent
unit.
14 Antenna
15 Stand
1Infrared LEDs
2Camera lens
3Light sensor
4Microphone
5Night light
6
Night light ON/OFF key
7LED indicator
8Power ON/OFF switch
9Speaker
10 Antenna
11 Power jack
12 Temperature sensor
Position the sensor horizontally
for its optimal usage.
Caution
• Do not bend the temperature
sensor upward.
13 Threaded socket for
wall mounting
14 Pair button
Parent unit icons
Main menu
Melodies and soothing sounds
Melodies and Soothing Sounds
• Select play all melodies, or play one of the
five melodies and four soothing sounds.
Timer
• You can also set the timer to stop playing
after 15, 30 or 60 minutes, or playing non-
stop.
Alerts - Sound, motion and temperature
Sound
• Select sound Sensitivity level.
• Turn on/off Sound Detection Alert.
• Turn on/off Auto Wake Up function.
(See Sound Detection and Auto Wake Up
section)
Motion
• Turn on/off Motion Alert.
• Select motion Sensitivity level.
(See Motion Detection section)
Main menu
Temperature
• Turn on/off Temperature Alert.
Set the parent unit to beep whenever the
room temperature detected by the baby
unit falls outside of the set temperature
range.
• Select Minimum temperature for alert
range.
• Select Maximum temperature for alert
range.
• Select temperature Format.
Set temperature display in Fahrenheit (oF)
or Celsius (oC ).
Parent unit settings
• Adjust parent unit screen Brightness.
• Turn on/off Dim Mode.
Baby unit settings
• Turn on/off Night Light.
• Turn on/off baby unit’s Status LED.
• Adjust baby unit’s speaker Volume.
General settings
• Turn on/off Low Battery Alert Tone.
Set the parent unit to beep when the
battery is low.
• Turn on/off No Link Alert Tone.
Set the parent unit to beep when the link
between the parent unit and the baby unit
is lost.
• Add Baby Unit
• Remove Baby Unit
Main menu icons
Quick start guide
x 2
x 2
Quick start guide
Charge the parent unit battery before use
When you have connected and turned
on the parent unit, the battery will charge
automatically.
NOTESNOTE
Notes
• Before using the baby monitor for
the first time, charge the parent unit
battery for 12 hours. When the parent
unit battery is fully charged, the battery
icon becomes solid .
• It takes longer to charge the battery when
the parent unit is turned on. To shorten the
charging time, turn the parent unit off while
charging.
• The standby time varies depending on the
parent unit sensitivity level you set, your actual use and the age of the battery.
The battery icon indicates the battery status (see the following table).
Battery indicators Battery status Action
The screen displays .
The light flashes.
The battery has very little
power and may only be used
for a short time.
Charge
without interruption
(about
30 minutes).
The battery icon becomes
solid .
The battery is fully charged. To keep the battery charged, connect
it to AC power when not in use.
Slide the ON/OFF switch leftward
to power on your baby unit.
After the parent unit is fully charged,
press and hold until the welcoming
screen appears.
Raise the parent unit antenna
for better reception
1
Connect the baby monitor (Cont’d)
< 3ft (1m)
> 3ft (1m)
≥
< 3ft (1m)
3ft (1m)
﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏
﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏
Adjust speaker volume
Press / to adjust your parent unit
speaker volume. It determines the volume of
sound transmitted to you from the baby unit.
Zoom
Press to zoom in or out.
Talk to your baby via the baby unit
1. Press and hold the key.
2. When the icon displays on screen,
speak to your parent unit. Your voice is
transmitted to the baby unit.
3. When finish talking, release
the key and hear your baby again.
Turn on/off the parent unit screen
You can turn on or off the parent unit
screen without powering off the parent
unit. You can still hear sounds from the
baby unit.
• Press / on the parent unit to turn
off the screen.
• Press any key on the parent unit to turn
the screen on again.
Current view status
Night vision
feature is activated
automatically.
Motion alert is
turned on.
Sound detection
alert is turned on.
Melodies or
soothing sounds
are turned on.
Night light is
turned on.
Status icons
Alert icons
• Displays when parent unit’s battery is low and
needs charging.
• Displays when motion is detected at a baby unit.
• Displays when sound is detected at a baby unit.
• Baby unit detects temperature exceeds the set
maximum.
• Baby unit detects temperature is lower than the
set minimum.
> 3ft (1m)
Muted
Press and hold
2
1
3
4
5
6
7
8
9
12
14
15
11
10
1
2
3
9
4
5
10
6
712
11
14
13
8
1
2
3
9
4
5
10
6
712
11
14
13
8
1
2
3
9
4
5
10
6
712
11
14
13
8
Caution
• Position the baby unit’s temperature
sensor horizontally for its optimal
usage. Do not bend it upward.
> 1 metre
> 1 metre
> 1 metre
> 1 metre
> 1 metre
Parent unit speaker
is muted.
Temperature alert
is turned on.
Real-time
temperature
indicator
Battery status
indicator
Specifications are subject to change without notice.
© 2021 VTech Telecomunications Ltd.
All rights reserved. 04/21. VM818HD_UK_QSG_V1
Technical specifications
Frequency control Crystal controlled PLL synthesizer
Transmit frequency Baby unit: 2406 - 2475 MHz
Parent unit: 2406 - 2475 MHz
Maximum power used by the transmitter: 0.1W (100mW)
Channels 24
LCD 5” Color LCD (IPS 1280x720 pixel)
Nominal effective
range
Actual operating range may vary according to environmental
conditions at the time of use.
Power requirements Parent unit: 3.8V, 2100mAh, 7.98Wh Lithium-ion battery
Baby unit power adaptor:
Output: 5V DC @ 1A
Parent unit power adaptor:
Output: 5V DC @ 1A
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für VTech VM818HD wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von VTech VM818HD

VTech VM818HD Bedienungsanleitung - Deutsch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info