3. USE
Gas system
Open the gas arrival by turning on the gas cylinder valve. You can optionally, briefly
press the regulator button to flush the air stuck into the hose.
Then open the small burner gas by turning the center knob to the left.
1/2 a turn is enough to switch on the gas to full.
Use a fire lighter between the openings of the cooking plate.
Check that the burner is properly ignited, then switch on the other burner according
to your needs by turning the right knob to the left.
The left knob controls the small burner located in the center of the stainless-steel
plate (grid). The right knob controls the large burner.
When one the burners are in use, the other can be turned on without using a fire
lighter.
THE GAS BURNER MAY WHISTLE SLIGHTLY IN THE BEGINNING OF USE BUT THIS
ONLY LASTS A FEW MINUTES.
In case of ignition problems, check that the regulator valve is open, or if the gas
cylinder is not empty, or if there is no leak in the gas circuit (flexible hose,
connection...).
