Bedienungsanleitung Wacom DTF-720 (Seite 22 von 180) (Deutsch, Englisch, Französisch)

513121

Zoom out

Zoom in

Vorherige Seite

1/180

Nächste Seite

Working with your DTF-720

Page 18

PEN OPERATIONS

Pointing and selecting: Move the pen above the DTF-720 display screen to position the screen

cursor. The pen tip needs to be within 5 mm (0.2 inch) of the display screen surface; you do not need to

touch the display surface to move the screen cursor. The cursor jumps to the location where you place

the pen (absolute positioning). Press the pen tip on the display screen to make a selection.

Note: You must calibrate the pen display tablet to correctly align the screen cursor with the pen tip. (See

Calibrating the DTF-720 on page 22.) If the screen cursor does not jump to a position close to the pen tip

when you place the pen on the display screen, then the pen tablet driver may not be installed or is not loading.

Install the pen tablet driver software if necessary. Otherwise, see Troubleshooting, beginning on page 33.

Clicking: Tap the display screen once with the pen tip, or touch the pen to the display screen with

enough pressure to register a click.

Windows tip: You can make navigating with the pen easier by conﬁguring Windows to select when the pen is

over an icon and to launch the icon with a single click. To turn on this feature ﬁrst open a folder.

or Windows Vista, from the ORGANIZE pull-down menu choose FOLDER AND SEARCH OPTIONS. From the

ENERAL tab select SINGLE-CLICK TO OPEN AN ITEM (POINT TO SELECT).

For other Windows versions, from the TOOLS pull-down menu choose FOLDER OPTIONS.... From the

GENERAL tab select SINGLE-CLICK TO OPEN AN ITEM (POINT TO SELECT).

Double-clicking: Press the upper side switch, or quickly tap the display screen twice in the same place

with the pen tip. Double-clicking is easier when the pen is perpendicular to the tablet screen. To ﬁne-

tune the double-click area, see Adjusting double-click on page 24.

Dragging: Select an object, then slide the pen tip across the display screen to move the object.

Using the side switch: The pen is equipped with a DuoSwitch. This switch has two programmable

functions that can be selected by rocking the switch in either direction. You can use the DuoSwitch

whenever the pen tip is within 5 mm (0.2 inch) of the display screen surface; you do not need to touch

the pen tip to the display surface in order to use the switch. The upper switch is set to D

OUBLE CLICK,

and the lower switch is set to RIGHT CLICK by default.

Drawing and writing with pressure sensitivity: The pen responds to the nuance and inﬂection of

your hand movements, enabling you to create natural-looking pen and brush strokes within applications

that support this feature. To draw and write with pressure, select a pressure-sensitive tool from your

application’s tool palette. As you work on the screen surface, use various amounts of downward

pressure on the tip of the pen. Press lightly for thin lines or softer color. Press harder for thick lines or

dense color.

DTF720_Manual.fm Page 18 Monday, December 22, 2008 10:13 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wacom DTF-720 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info