Bedienungsanleitung Wacom Intuos - CTH-460 (Seite 56 von 73) (Englisch)

564438

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

IndexContents

Contents

Index

Contents

Index

The pen tip does not function. Be sure you are using only a compatible Wacom pen, such as the pen

that shipped with your product, or a Wacom accessory tool specified

for use with Intuos. Other pens may not function properly on the tablet.

Check the control panel P

EN tab and verify that a CLICK function is

assigned to the tip.

The Status LED should brighten when the tip is pressed. If not, you may

have defective hardware. See Testing the tablet controls and tools

Changing the settings of the

pen or other tool has no effect.

Make sure you are changing the settings for the tool and application

that you are using. See Creating an application-specific setting

The pen side switch does not

work.

Be sure you are using only a compatible Wacom pen, such as the pen

that shipped with Intuos or a Wacom accessory tool specified for use

with Intuos. Other pens may not function properly on the tablet.

Be sure to press the side switch when the pen tip is within 10 mm (0.4

inch) of the tablet active area. Do this without pressing down on the

pen tip.

In the Wacom Tablet control panel, verify that the side switch is set to

the function you are expecting to occur for the application and tool you

are using.

Check the S

IDE SWITCH MODE. If CLICK & TAP is selected, you will need

to first press the side switch while touching the pen tip to the tablet

surface in order to perform a click function. See Options

The Status LED should brighten when you press the side switch.

If not, you may have defective hardware. See Testing your tablet

The screen cursor “jumps”

back.

Do not place an Intuos tool on the tablet when it is not in use, or when

you are using another pointing device. Leaving your tool on the tablet

may interfere with screen cursor positioning when using other input

devices.

You cannot move the cursor

where you want to on the

screen, or the line you are

drawing does not line up with

the location of the pointer in

paint applications.

Open the Wacom Tablet control panel and go to the M

APPING tab.

Verify that P

EN MODE is selected and that the SCREEN AREA is set to

ULL for the selected tool and application. If this does not help, click on

the D

EFAULT button to reestablish tablet to screen mapping. If you are

still having difficulty, remove the tablet preferences (see Windows-

specific problems or Mac-specific problems).

Confirm whether the pen does (or does not) function. See Testing the

tablet controls and tools.

When using Intuos on a

multiple monitor system, you

cannot use the pen to control

the other monitor(s).

Cycle pen control for Intuos between your displays by pressing an

ExpressKey or pen button that is set to D

ISPLAY TOGGLE.

Verify that the S

CREEN AREA in the MAPPING tab is set to FULL.

You can also use your pen to control the other monitors in mouse

mode. To use mouse mode, first set a pen button to M

ODE TOGGLE....

Then use the button to toggle between P

EN MODE and MOUSE MODE.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wacom Intuos - CTH-460 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Wacom Intuos - CTH-460

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info