Bedienungsanleitung Wagner Super Finish 27 (Seite 6 von 30) (Deutsch, Englisch, Französisch, Italienisch)

649001

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Super Finish 27 • 31

Description of unit

Attention: Make sure, when stirring up with

motor-driven agitators that no air bubbles are

stirred in. Air bubbles disturb when spraying and

can, in fact , lead to interruption of operation.



With this unit it is possible to process highly viscous coating

materials of up to around 25.000 mPa·s.

If highly viscous coating materials cannot be taken in by suc-

tion, they must be diluted in accordance with the manufac-

turer’s instructions.



The appropriate processing time must be adhered to exactly.

Within this time rinse through and clean the unit meticulously

with the appropriate cleaning materials.

    

materials

These have a strong wear and tear eect on valves,

high-pressure hose, spray gun and tip. The durability of

these parts cane be reduced appreciably through this.



 

The main areas of application are thick layers of highly viscous

coating material for large areas and a high consumption of

material.

A diaphragm pump takes in the coating material by suction

and conveys it to the tip. Pressed through the tip at a pressure

of up to a maximum of 250 bar (25 MPa), the coating material

is atomised. This high pressure has the eect of micro ne at-

omisation of the coating material.

As no air is used in this process, it is described as an AIRLESS

process.

This method of spraying has the advantages of nest atomisa-

tion, cloudless operation and a smooth, bubblefree surface. As

well as these, the advantages of the speed of work and con-

venience must be mentioned.

 

In the following there is a short description of the technical

construction for better understanding of the function.

WAGNER Super Finish 27 and 31 are electrically driven high-

pressure spraying units.

The electric motor (g. 2, item 1) drives the pump by means of

a toothed belt (2).

In the pump the diaphragm (3) is moved up and down by

means of hydraulic oil.

The inlet valve is opened independently through the down-

ward movement of the diaphragm.

The outlet valve is opened by means of the upward movement

of the diaphragm. The coating material ows under high pres-

sure through the high-pressure hose to the spray gun. The

coating material is atomised when owing out of the tip.

The pressure regulating valve (4) controls the operating pres-

sure and the quantity of the conveyed coating material.



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wagner Super Finish 27 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info