Bedienungsanleitung Wallbox Pulsar Plus (Seite 3 von 29) (Englisch, Französisch, Spanisch)

802048

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

4 5

EN EN

• Your Wallbox charger contains no user serviceable parts. Do not attempt

to repair or service any other part of the unit yourself. If the unit requires

servicing, please contact Wallbox customer service.

• The installation, maintenance, and servicing of your Wallbox charger must

only be performed by qualified personnel in accordance with applicable local

regulations.

• Protect your Wallbox charger from any external impact.

• Take appropriate precautions with electronic medical implants.

• Disconnect the main service power to your charger before cleaning the unit.

Do not use cleaning solvents to clean any part of your charger. Use a clean,

dry cloth to remove accumulated dust and dirt.

• Under no circumstance should you over-tighten the connecting cable while it

is connected to the vehicle.

• Ensure that the charging cable is positioned in such a way so that it will not be

stepped on, tripped over, or subjected to damage or stress. Do not close your

garage door on the charging cord.

WARNING: Improper connection of the equipment-grounding conductor may

result in a risk of electric shock. Check with a qualified electrician or service

person if you are in doubt as to whether the product is properly grounded. Do not

modify the plug provided with the product. If it does not fit the receptacle, have a

proper receptacle installed by a qualified electrician.

Maintenance instructions

• Read all instructions before installing and using your Wallbox charger.

• Permanent (hardwired) connection of your charger and/or installation of

electrical circuits, conduit, and NEMA receptacles must only be performed by a

qualified electrician in accordance with all local electrical codes and ordinances.

Unauthorized installation or modifications will void the manufacturer’s warranty.

• This device should be supervised when using around children.

• Do not put fingers into the electric vehicle connector.

• Do not use your Wallbox charger if the flexible power cord or EV cable is frayed,

has broken insulation, or any other signs of damage.

• Do not use your Wallbox charger if the enclosure or the EV connector is broken,

cracked, open, or shows any other indication of damage.

• Do not operate your Wallbox charger in temperatures outside its operating range

of -22ºF to 104ºF (-30ºC to 40ºC).

• Do not open your charger in rain or other inclement weather.

• Do not open the front cover of your charger while it is connected to the power

supply.

• Install your charger in a suiciently ventilated location and avoid installation

in areas with direct sunlight.

• Do not install your Wallbox charger near flammable, explosive, or combustible

materials.

• All documents can also be found online at support.wallbox.com/na

• In case of flooding, do not operate your charger while it or your vehicle is

submerged in water.

• If your charger was submerged in water due to flooding, have a qualified

electrician inspect your charger prior to energizing or using your charger again.

Your Wallbox charger must be grounded. If it should malfunction or break down, grounding

provides a path of least resistance for electric current to reduce the risk of electric

shock. Your charger is equipped with a cord having an equipment grounding conductor

and a grounding plug. The plug must be plugged into an appropriate receptacle that is

properly installed and grounded in accordance with all local codes and ordinances.

Warning for Wallbox AC plug-in products: Grounding instructions

WARNING: When using electric products, basic precautions should always be

followed, including those below. This manual contains important instructions that

cover the safe installation, operation and maintenance of the unit.

WARNING: Consult a qualified electrician to ensure that the installation meets local regulations.

This product must be connected to a grounded, metal, permanent wiring system,

or an equipment-grounding conductor must be run with the circuit conductors and

connected to the equipment grounding terminal on the product.

See installation instructions.

Warning for Wallbox hardwired products: Grounding instructions

SAVE THESE INSTRUCTIONS | INSTRUCTIONS PERTAINING TO RISK OF FIRE OR ELECTRIC SHOCK.

Any information in this manual may be changed without prior notice and does not

represent any obligation on the part of the manufacturer.

Any resulting damage due to disregard or actions contrary to the instructions in this

manual is excluded from the product warranty.

Images in this manual are for illustration purposes only and might dier from the

delivered product.

Legal notice

Moving and storage instructions

• Your Wallbox charger should never be lifted or carried by the power supply

cord or by the EV cable. Always lift or carry your charger by lifting up the

charger’s enclosure.

• The charger is only to be used for fixed installations and cannot be used as a

portable device.

• Store your Wallbox charger in a dry location, and within the storage

temperature of -40ºF to 158ºF (-40ºC to 70ºC).

GETTING STARTED

Safety instructions

Wallbox Pulsar Plus Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Wallbox Pulsar Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info