Bedienungsanleitung Wamsler Pylon 1G (Seite 26 von 64) (Deutsch, Englisch, Französisch, Italienisch)

813184

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Floor in front of and under the fireplace

Floors made from combustible materials, such as carpets, parquet floors or cork is to

be protected by a shield of non-combustible material – for example ceramics, stone,

glass or steel – placed under the fireplace so that it should reach out to

50 cm in front and 30 cm besides.

2.4 Connection of the fireplace

The connection for attaching to the chimney must be able to with-

stand at least 400°C.

PLEASE NOTE:

Before connecting the stove the local authority responsible

for approving heating systems must be consulted!

Connection pieces must be firmly connected to the stove and to

each other and must not leak. They must not project into the open

diameter of the chimney. The connection piece between the stove

and the chimney must have the same diameter as the pipe socket

on the stove. Horizontal connection pieces of over 0.5 m must

rise towards the chimney at an angle of 10 degrees. Any pipes

which are not heat insulated or vertical must not be longer than 1 metre.

The requirements of the Fire Regulations (FeuVO) apply, as well as local building

regulations such as for the chimney standards DIN 4705, DIN EN 13384, DIN 18160

and DIN EN 15287.

Connection pieces must be tested to DIN EN 1856-2. Measurement X (distance from

flammable construction and other materials) must be as defined by the manufacturer

of the connection piece.

PLEASE NOTE:

Fitting to a chimney with a functional height of less than

4 m, or if several toves are being fitted, less than 5 m, is not permitted. (See:

Data for chimney calculations / Chapter 3.) A maximum of two other fires can be

connected to the chimney to be conected to the stove (Germany).

For safety reasons it is not permitted to use a steam extractor hood to remove

air when the stove is producing heat.

2.5 Outside air intake

Oxygen or air is constantly required for the combustion process. As a rule, the air

available in the installation room is sufficient (see also Chapter 2.2).

With well-sealed windows and doors, the presence of mechanical ventilation (e.g.

kitchen or bathroom) or other fireplaces (including gas boilers) in the apartment, the

proper air supply can be severely disturbed. If this is the case, it is possible to supply

the combustion air directly from outside or from another, sufficiently ventilated room

(e.g. basement).

For this purpose, the wood-burning stoves offer a central air intake nozzle Ø 100 mm

on the back as standard, which must be installed.

Only smooth pipes with a minimum diameter of

100 mm can be used. The air line should also have a shut-off valve near the furnace.

The position "open" - "closed" must be clearly marked on the butterfly valve and must

be carried out correctly. Among other things, arches must have inspection openings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wamsler Pylon 1G Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info