Bedienungsanleitung Wanders 75 (Seite 16 von 64) (Deutsch, Englisch, Holländisch, Französisch)

694505

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Your Square stove at a single glance

The Square 60

The Square is a combination of comfort and ecient

heat emission. The large glass panes allow emission

of the heat from the stove directly to the environment

to make your room instantly comfortable. The built-in

ue gas deector ensures circulation of ue gases in the

interior parts. Combined with the extra after-burning, it

means that the ue gases have better combustion and

reduce the burden on the environment. You can regulate

the intake of combustion air with the integrated air slide

valve and adjust the intensity of the re and the output

of your stove.

Installation

It is common practice for the dealer where you purchased

your Square stove to also take care of installing it. If

this is not the case, please ensure that the installation is

done by a certied installer. A certied installer can also

give you the right advice about the ue pipe to which

the stove must be connected. Connecting wood-burning

stoves by unqualied persons is prohibited, in which case

we cannot give any guarantee about proper functioning

of your Square stove. Please bear the re safety in mind

when installing the stove. See also page 21.

The wood-burning stove is suitable as an extra heat source

and does not replace your principal heating device.

Lighting the stove

The stove will become very hot when you light it and

will need at least two hours to cool o. Don’t touch the

stove without protection during ring and for two hours

after. Handle the stove always with a glove to avoid

getting serious burns.

Before lighting the re, you must clean away any deposits

on the window pane with a paper from a kitchen roll.

The same paper can be used for lighting the re.

Open the combustion air inlet. Open the slide to its

maximum before lighting the stove. Then open the door

and put some balls of paper or relighters in the stove

and place some wood kindling on top. Light the kindling

and leave the stove door ajar (for 3 to 5 minutes) for

extra air supply and enhancing chimney draught. Once

the kindling has caught re you can add extra wood.

(Put the logs loosely on the re so that the ames can

catch on all around).

How the air valve works

The air valve has 3 positions:

1. Opened all the way: the primary and secondary air

supply is open.

2. Pressed until the rst click is heard: only the sec-

ondary air supply is open and the stove will pro-

duce the highest yield while the glass cleaning sys-

tem works optimally.

3. Pressed until the second click is heard: everything is

closed, and the re will go out slowly.

Lighting your stove early in autumn or late in

winter

When the external and internal temperatures do

not dier much, a proper chimney draught is a real

challenge. You can help chimney draught get started

by burning some wood while keeping all air inlets

maximally open. An abundant air supply speeds up

quick heating which in turn increases the draught

in the chimney. Lighting up the stove with only a

little wood prevents smoke from streaming into the

room.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wanders 75 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info