Bedienungsanleitung Wanders Basic Line (Seite 19 von 32) (Englisch, Holländisch)

694495

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Lighting the stove for the rst time

Discolouration of walls, ceilings and grates

The walls, ceilings and grates may show some discolouration after lighting your hearth. This is caused

by the dust particles that burn in the convection cover. This is a natural process for which WANDERS

cannot be held responsible. To minimize discolouring we refer to the advice given for atmospheric

hearths. Your installer can give you more information about this.

When you light the Square Basic Basic for the rst time, the hearth must still ‘anneal’ and temper itself. The

unit has a heat resistant lacquer which must burn in the stove at temperatures above 400 °Celsius. This will

happen during the rst few times of lighting the stove and temperatures rise to 600 °C. Though this may give

an unpleasant smell, it is otherwise harmless. It is advisable to keep the stove burning with limited fuel for at

least 6 hours when lighting the stove for the rst 4 or 5 times. Air the room well when the stove is burning.

Make sure that any cooking hood is not turned on when the stove is burning; a cooking hood extracts the

combustion air that the stove needs.

Some deposit may form on the glass panes of the stove when you ‘anneal’ your hearth. You can easily remove

this deposit with a damp cloth after the stove has cooled down. You can also use some cleansing agent for

ceramic rings. Please make sure you do not leave any nger marks on the clean glass. Finger marks burn into

the glass and cannot be removed later.

Newly-built house or recently renovated?

It is advisable to wait six weeks before lighting the stove in a newly-built house that has recently

been completed, or in a space that has recently been renovated drastically. The walls and ceilings still

contain gases, softeners and moisture from plasterwork or paint. The warm air-streams may discolour

the dust particles in the space which may stick to walls and ceilings. Even the moisture in the walls and

ceilings will become warm and may cause yellow stains.

Fuel

Wood Drying time

Fir, Poplar 1 year

Lime, Willow, Spruce, Birch, Ash, Alder 1,5 years

Fruit trees, Beech 2 years

Oak 2,5 years

The Square Basic Basic only burns on wood. Do not put more than 3 kg of fuel in the stove at the time. Always

use clean and cut logs, which have suciently dried. Please see the above list for drying times. Wet wood does

not burn well and gives heavy smoke emission. It may blacken the glass pane of your stove with soot and build

up smut in the ue pipe. This may increase the risk of chimney re.

Fresh, moist wood contains about 50% moisture. Cleaved wood still contains 20% moisture after drying it for

a year and moisture percentage will be decreased to 12 to 15% after drying it for two years. Dry wood gives nice

ames and little or no smoke, and the re will crackle when burning. Wet wood makes a hissing sound, gives

much smoke and only small ames which will considerably dampen the pleasure of burning your stove and the

heat output.

Do not put any paran-containing logs in your stove. When the door is closed, the high heat will

melt the paran from the logs too quickly. The polluted ue gasses which consequently develop will

deposit on and burn in the glass of your stove and cannot be removed later.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wanders Basic Line Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info