Bedienungsanleitung Wanders Black Diamond Compact (Seite 19 von 64) (Deutsch, Englisch, Holländisch, Französisch)

533309

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Slide the valve in the ue gas pipe  open. Slide the

air valve  to its maximum position. Open the door

and put some balls of paper or some relighters inside

the stove and place some wood kindling on top. Light

the kindling and leave the door ajar to let in extra air

and, if necessary, slide the ashpan  and the shaking

grate  a bit open. Once the stove is burning, which

is after about ve minutes, you may close the door

and the ashpan again. Do not place more than three

logs in the stove at a time. Be sure there is always

enough ventilation when the stove is burning. If you

want to temper the re, you must rst close the valve

in the ue tube and then close the air supply and the

shaking grate.

Avoid nger marks

Do not touch the glass of the stove with your ngers. Finger marks will burn into the glass and cannot

be removed later.

It is prohibited to light the stove with liquids like petrol or spirits.

Do not have the cooker hood on in the room where you operate your stove. Never touch the varnished

parts when you heat your stove.

Lighting the stove for the rst time

Discolouration of walls, ceilings and grates

The walls, ceilings and grates may show some discolouration after lighting your hearth. This is caused

by the dust particles that burn in the convection cover. This is a natural process for which WANDERS

cannot be held responsible. To minimize discolouring we refer to the advice given for atmospheric

hearths. Your installer can give you more information about this.

When you light the Black Diamond for the rst time, the hearth must still ‘anneal’ and temper itself. The unit

has a heat resistant lacquer which must burn in the stove at temperatures above 400 °Celsius. This will happen

during the rst few times of lighting the stove and temperatures rise to 600 °C. Though this may give an

unpleasant smell, it is otherwise harmless. It is advisable to keep the stove burning with limited fuel for at

least 6 hours when lighting the stove for the rst 4 or 5 times. Air the room well when the stove is burning.

Make sure that any cooking hood is not turned on when the stove is burning; a cooking hood extracts the

combustion air that the stove needs.

Some deposit may form on the glass panes of the stove when you ‘anneal’ your hearth. You can easily remove

this deposit with a damp cloth after the stove has cooled down. You can also use some cleansing agent for

ceramic rings. Please make sure you do not leave any nger marks on the clean glass. Finger marks burn into

the glass and cannot be removed later.

Newly-built house or recently renovated?

It is advisable to wait six weeks before lighting the stove in a newly-built house that has recently been completed, or in

a space that has recently been renovated drastically. The walls and ceilings still contain gases, softeners and moisture

from plasterwork or paint. The warm air-streams may discolour the dust particles in the space which may stick to

walls and ceilings. Even the moisture in the walls and ceilings will become warm and may cause yellow stains.









Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wanders Black Diamond Compact Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Wanders Black Diamond Compact

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info